3D ModelingAM Press ReleasesAM SoftwareAutomotive AMDfAMFormnextParametric Design

Ford and trinckle further automate the design process for additively manufactured tools

Custom software lets designers create custom jigs in a matter of minutes

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

Ford has been using additively manufactured production and assembly tools for several years. Up to 50% of the respective costs are related to the creation of design data. In order to scale the applications of Additive Manufacturing (AM), Ford is partnering with software company trinckle to automate the design process.

The use of additive manufacturing (AM) for production tools and assembly aids, such as jigs and fixtures, is not a new idea – neither at Ford nor at any other automotive manufacturer. The advantages of this application are obvious: relatively low production costs considering the low quantities, lower weight in comparison to their conventionally manufactured counterparts and faster availability in case of unscheduled demand. At Ford alone, more than 50 different additive manufactured tools are used in serial production today.

With this AM application, automotive manufacturers can reduce costs. In contrast to other innovations in the area of AM, which may be more spectacular but will pay off in a few years at the earliest, cases like the one described above are low-hanging fruits.

However, Lars Bognar and Raphael Koch, responsible engineers at Ford Research & Advanced Engineering Europe, did not want to settle for this. They looked at the AM application as a whole. They used the example of a labeling jig which is a hand tool used to place model badges on the body of the vehicle.

“Additive manufacturing itself is no longer the dominating cost factor limiting the scalability of the application. Up to 50% of the total costs per tool are caused by manual design, which is the new bottleneck,” said Lars Bognar, Ford Research & Advanced Engineering Europe. “For each new line and each special edition, these tools must be specifically designed to position the badges with exact accuracy. This design task – he continued – is not a trivial one, as the tools have to adapt precisely to the free-form surfaces of the car body sheet. It can easily last between two and four hours to create an appropriate AM-ready design. A time that is hard to find for designers, who are already working at full capacity. In the worst case, a short-term demand can result in a delay of assembly because the corresponding tools are not available. It was time for us to rethink the design process from scratch, and that’s when we came across the trinckle team,” Bognar concluded.

Berlin-based trinckle is specialized in automated design and product configuration in the field of additive manufacturing. Using its cloud software paramate, trinckle develops software applications for the automated design of AM products across all industries. These applications can even integrate the user himself into the design process.

For Ford, trinckle developed an internal application for the efficient generation of labeling jigs – to create new jig designs within a few minutes. Within an intuitive user interface, the user simply uploads the model data of the car body and the badges to be placed. Then he adds some standard elements such as handles, magnet mounts for fixation, edge guides and text fields by mouse click. The underlying algorithms of the paramate software automatically generate the geometry of the tool – precisely fitting the contour of the car body.

The design process no longer requires 2-4 hours, but only 10 minutes. The handling is so straightforward that neither the qualification of a CAD designer nor AM-compliant design expertise is needed. As a result, employees at the assembly line are also empowered to design tools on their own. While feedback loops between tool users and designers used to be very complex, users are now enabled to carry out tool optimization iterations independently.

“The trinckle software application does not only dramatically reduce manual design times and costs, but also streamlines the entire process. We enable our employees on the shop floor to take over more responsibility and relieve our designers at the same time. The latter can focus on their core activities again, ” commented Raphael Koch from Ford Research & Advanced Engineering Europe.

For Lars Bognar and Raphael Koch, the automated creation of labeling jigs is a first and important step in the right direction. Many other additive tools will undergo similar automation in the future.


Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Davide Sher

Since 2002, Davide has built up extensive experience as a technology journalist, market analyst and consultant for the additive manufacturing industry. Born in Milan, Italy, he spent 12 years in the United States, where he completed his studies at SUNY USB. As a journalist covering the tech and videogame industry for over 10 years, he began covering the AM industry in 2013, first as an international journalist and subsequently as a market analyst, focusing on the additive manufacturing industry and relative vertical markets. In 2016 he co-founded London-based VoxelMatters. Today the company publishes the leading news and insights websites VoxelMatters.com and Replicatore.it, as well as VoxelMatters Directory, the largest global directory of companies in the additive manufacturing industry.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.