X-Hab 3D completes first 3D printed home in Nome, Alaska

A team led by construction robotics startup X-Hab 3D has completed the structural walls of a 3D-printed concrete home in Nome, Alaska — a first for additive construction in the region’s extreme coastal climate. Located on the edge of the Bering Sea, the site posed significant logistical and environmental hurdles, offering a real-world test of automation in remote housing applications.

The project is supported by the Denali Commission, the U.S. Department of Housing and Urban Development (HUD), and the University of Alaska Fairbanks. Work began in summer 2025, but construction was temporarily halted when the locally produced concrete mix arrived contaminated with oversized aggregate and fiber, rendering it incompatible with the pump and printhead. Rather than abandon the batch, the X-Hab 3D crew manually sifted over 100,000 pounds of material to recover what they could.

A secondary mix supplied by Sika enabled work to resume, but by then, Nome’s fall weather had set in, with rain, 40 mph wind gusts, and temperatures dipping into the low 30s Fahrenheit. To maintain environmental controls, the team erected a heated plastic enclosure around the print area, anchoring scaffolding with super sacks to prevent wind lift.

“We completed all four walls — a first for 3DCP [3D concrete printing] on the edge of the Bering Sea,” said Bruce Kraselsky, Co-Founder and CEO of X-Hab 3D. “The real story is what we learned and how we’ve grown: material quality is key — test and verify the mix before it hits the site. And adaptability is our core strength.”

The printer will remain in Nome for future builds, underscoring the project’s long-term intent to validate scalable, remote construction methods rather than serve as a one-off demonstration.

From an engineering perspective, the project highlights the trade-offs of automated construction in non-ideal settings. While 3D printing can cut labor requirements and reduce build time, its success hinges on mix calibration, machine consistency, and adaptability to unpredictable field conditions — especially in harsh climates.

The effort could inform future deployments of 3D construction printing in remote or disaster-prone areas, where traditional construction methods face significant cost and logistical barriers.