ValCUN Remus takes aluminum MMD out of the box
Independent printhead enables large-scale metal deposition
Based in Belgium, ValCUN has carved out a prominent position for itself in the metal AM market with its aluminum 3D printing process Molten Metal Deposition (MMD). The technology, a direct extrusion process that uses off-the-shelf metal wire as feedstock, overcomes many of the challenges associated with aluminum 3D printing and unlocks the use of industry-standard aluminum grades.
The MMD process was first commercialized in the Minerva 3D printer, an enclosed system launched in 2023 that integrates wire feeding, melting, deposition, heating, and motion control in a single platform. Last year, ValCUN expanded the capabilities of its MMD technology even further with the launch of Remus, an independent printhead designed to be integrated into industrial production chains.
Remus has introduced a whole new set of possibilities for ValCUN’s aluminum AM technology. Capable of being mounted on a multi-axis robotic arm, on a large-scale gantry system, or in a production cell, the printhead dramatically ups the scale of MMD and enables non-planar deposition, part repair, point-of-need deployment, and hybrid manufacturing.
Recognizing limitations
ValCUN’s two MMD-based solutions cover a broad spectrum of aluminum AM applications, from material development to large-scale aluminum part repair.
As a fully contained system, the Minerva 3D printer is a valuable tool for universities, research institutes, and industrial engineering teams, who can benefit from MMD’s capabilities through a relatively compact, standalone system. This is enabled by one of the MMD process’ main selling points: that it does not require additional heat treatments or post-processing to create high-quality aluminum parts.
The Minerva platform integrates a heated build plate with a diameter of 125 mm. It is this heat source that encourages strong layer adhesion as molten aluminum is deposited layer by layer. Since its launch, the system has demonstrated its capacity to print high-quality aluminum structures on a smaller scale, including catalytic air purifiers, heat exchangers, and more.
As ValCUN points out, it has also demonstrated the ability to 3D print complex geometries, with overhangs over 70° and bridges spanning more than 100 mm without the need for supports. In a study by the European Space Agency (ESA), the Minerva platform even proved it could 3D print upside down, making it potentially viable for low-gravity printing.
When it comes to larger structures, however, the Minerva is more limited. As ValCUN explains: “For taller components, the deposition point moves progressively further from the heat source, making thermal management increasingly dependent on geometry and heat loss.” The company also points out that simply making the 3D printer’s envelope bigger is not the best option due to the complexity involved in uniformly heating a larger surface to 500°C while simultaneously controlling thermal expansion and deformation.
To print big, the company thus had to think outside of the box. Literally.
Introducing Remus
First unveiled in late 2025, Remus is ValCUN’s answer to large-scale, industrial MMD. The printhead, which can be integrated into industrial robots, features a compact plasma source positioned just ahead of the deposition nozzle. This means that as the printhead melts and prepares to deposit the aluminum feedstock, the plasma source preheats the receiving surface and removes oxide to ensure metallurgical bonding between layers.
“Instead of preparing the entire build environment thermally, Remus prepares the material locally where deposition occurs,” ValCUN says. “For large parts, this means the thermal management system does not need to increase together with the dimensions of the component. The thermal input follows the deposition process rather than relying on heat transferred from a large build plate.”
This technique not only enables optimal bonding between the printed layers: it also works with substrates, such as existing components that need repair or reinforcement. Moreover, because the printhead can be fitted onto robotic arms, Remus has greater freedom of movement than the gantry-based Minerva, facilitating the printing of curved and non-planar surfaces.
Remus itself is an independent module that comes with a controller and software. In addition to its plasma source, the printhead introduces some other innovations, including an improved thermal system, increased heating power, and upgraded wire feeding for increased throughput. With an extrusion system based on volumetric control principles, Remus is compatible with a range of aluminum alloys, including industrial Al-6000 and Al-7000 series.
“These developments extend MMD beyond the operating envelope of a conventional 3D printer and enable applications where size, geometry and production environment become defining requirements,” ValCUN emphasizes.
More applications for MMD
In adding Remus to its hardware portfolio, ValCUN has not only made it possible to print larger parts using its innovative MMD process, it has also expanded how its technology can be deployed. With its ability to be mounted on a multi-axis robotic arm or a large-scale gantry system, Remus allows manufacturers to build the production process around the application, rather than the other way around. Let’s take a look at some application areas:
Aluminum fan blades
Remus is a strong production candidate for producing large-scale aluminum fan blades, which can be used for ventilation in data centers, HVAC systems, clean rooms, and more.
The performance of fans is directly tied to the shape and weight of the blade. As ValCUN says, “Curvature, thickness, and overall three-dimensional shape affect airflow behaviour, pressure generation, and ultimately the energy required to move air.” Because most industrial fan blades are today made using conventional approaches that require tooling, they are limited in terms of their geometry and can thus fall short when it comes to performance and efficiency.
With large-scale MMD enabled via the Remus printhead, however, complex lightweight fan blades can be realized in an economical way. With the printhead on a robotic arm, it is possible to directly manufacture a single-wall structure using non-planar toolpaths that follow the curve of the blade. This results in optimized blades that are more lightweight and aerodynamic, all without the need for tooling.
According to ValCUN, a fan with optimized blades can reduce fan energy losses by around 30%. If we’re talking about fan use on the scale of something like a data center, this efficiency gain can lead to electricity savings in the range of €2.5 million ($2.8M) annually.
Looking forward, ValCUN even suggests that its MMD technology could be used to print fan blades directly onto the fan hub, eliminating assembly requirements. “The combination of design freedom, automation and increased material throughput makes large flow components a natural application area for Remus,” the company adds.
In-the-field deployment
Another notable application area for Remus is in defense, particularly for field-deployed manufacturing and localized system repair.
In the military, the ability to repair vehicles and other equipment in the field without having to transport a whole inventory of spare parts is highly valuable. And no other technology is unlocking this capability like AM.
In the case of Remus, the printhead could be integrated into a containerized production cell that could be transported and deployed in remote areas. As ValCUN points out, in this case the main selling point for the technology is not the geometric complexity it can achieve, but the supply chain hurdles it overcomes.
“Aluminium wire is compact, safe and straightforward to store, while the same feedstock can produce different geometries without dedicated tooling or need for a high variety of feedstock storage,” ValCUN emphasizes. “A deployable MMD system could therefore manufacture selected brackets, housings, connectors, structural elements or replacement parts closer to the point of use.”
Not only could Remus be deployed for manufacturing spare parts on demand, the system can also 3D print directly onto existing structures, enabling the repair of damaged or broken components and extending the lifespan of existing systems. These capabilities also have huge potential outside of the defense sector and can be a boon to any industry with complex spare part logistics, like oil & gas, maritime, offshore, mining, and more.
Hybrid manufacturing
ValCUN’s MMD process can also be used as part of a hybrid manufacturing workflow by using the Remus printhead alongside conventional production approaches. For example, material can be strategically deposited onto a machined, cast, or otherwise formed part for the purposes of adding local reinforcement, mounting features, custom interfaces, or geometrically complex sections.
This hybrid approach captures the benefits of both conventional production and additive manufacturing, using the former to realize the “simple, economical, and repetitive” segments of the product and using MMD only where it provides a functional or economic advantage. “The engineering question therefore changes from ‘Can this complete component be 3D printed?’ to ‘Where does digitally adding aluminium improve the product or simplify its production?’,” the company says.
For example, a standardized component could be manufactured at scale using the most efficient process. From there, MMD could selectively deposit application-specific features as needed or add reinforcement onto an existing part without having to redesign the whole component.
Industrial MMD is here
With the launch of Remus, ValCUN has taken its MMD process to the next level. Now, not only can the technology be used in the context of application development, R&D, and small-scale production via the Minerva 3D printer, it also has a place in industrial production environments.
Thanks to the combination of multi-axis integration, higher-throughput deposition, and plasma-assisted local surface preparation, Remus offers manufacturers in diverse industries a method for making optimized, large-scale aluminum structures, repairing existing components, producing spare parts on demand, or maximizing efficiency with hybrid processes.
“The result is more than an increase in build volume or a new printhead,” ValCUN concludes. “It represents a change in how aluminium additive manufacturing can be deployed: the production system can be configured around the component and manufacturing process instead of requiring the component to fit within a predefined printer.”




