3D Printing ProcessesMetals

Up close and personal with Arcam’s EBM technology

An exclusive chat with Arcam's VP's of Engineering and Technology

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

During 3dpbm’s recent visit to the new GE Additive Arcam EBM Center of Excellence in Gothenburg, we had the opportunity to sit down with the two persons in charge of the company’s Technology and Engineering teams: Annika Ölme, VP of Engineering, and Isak Elfström, VP of Technology. Their teams make sure that EBM technology remains the leading AM process it has become, as it now moves more stably into serial production environments. Four years after the momentous acquisition by General Electric, and the consequent establishment of the GE Additive division, Arcam’s EBM technology is flying high, together with former “rivals” Concept Laser in Germany and the rest of the internal GE teams.

“It [the GE acquisition] was a defining moment for us,” says Ms. Ölme. “It has been very beneficial to have a truly industrial owner and to be owned by a company that is also one of our key customers. Aviation has been a key sector for Arcam from the beginning, so we work very closely with GE Aviation and we are now increasingly seen as a very stable and solid player in this segment, which is of paramount importance for aerospace companies.”

Annika Ölme, VP of Engineering, shows the largest part ever built on an EBM system.

At the time of the acquisition, GE did not have an internal additive division – and was definitely not an AM hardware manufacturer – so Arcam’s team was able to continue to build on their capabilities. “It was a very soft transition with no men in black suits coming in to implement new practices,” jokes Mr. Elfström. “We started to interact and looked at how we could grow together. The bottom line is that there are many synergies between Concept Laser and Arcam and we also see synergies with other GE businesses.”

For example, something that most may have never considered is that GE has been using electron beam-based technology in other areas for more than a century, in X-ray based devices such as CT Scanners and other measurement systems. In fact, electron beam generation was invented by GE in 1919. “Among other benefits this means that I finally have colleagues that I can talk to, who know electron beam science and who have built up more than 50 years of experience working with electron beams.” Mr. Elfström points out.

EBM technology
Isak Elfström, VP of Technology, detailed his vision for Arcam’s future automated EBM factories

So what’s next for Arcam’s AM technology? The company has built its success on having a sharp focus on two specific application verticals: Aerospace and Medical. The increased strength deriving from working within GE means that Arcam now has the necessary resources to begin targeting more key segments as well. And much like Arcam’s applications for aerospace and medical have been based on titanium and titanium alumide, new segments mean new materials.

The relationship between Arcam and GE dates back to long before the acquisition and is very much connected to titanium alumide. “It [titanium alumide] was initially a GE patented material. When the patent expired, an innovative Italian company called Avio Aero (now also part of GE) – that was already using EBM for their production processes in aerospace – began working on using it in our machines. That proved to work out quite well for TiAl blades aero engine blades production and eventually led to GE acquiring Avio Aero. Which in turn led to GE acquiring Arcam and all three companies now working closely together.

EBM technology is particularly suited for processing copper as electron beams are not reflected. The newly available material is targeted at applications in aerospace and automotive.

Two recent materials recently introduced for EBM, copper and tool steel, may now serve as the basis to target new segments such as the automotive and the Oil and Gas industries. “Copper, which we have recently presented, is considered interesting for conductive automotive parts while, tool steel is quite relevant for oil and gas, for drill components and other downhole parts” says Ms Ölme. “Historically part of our success has been to focus. Trying to do everything is a danger in AM but we are now able to focus on more things.”

EBM technology
Another new material on the way is tools steel, target at the oil and gas industry. Because of the low thermal gradient in the EBM process, even large, thick parts such as this drill component, are much less likely to crack

The longer-term future looks even brighter. EBM technology has no inherent physical size limitations and the range of possible materials is quite large. “There are no real limits. We chose to use coarser powder then laser PBF processes only for economic and sustainability issues but we could also process very fine powders if needed,” says Mr. Elfström. “A lot of our university customers use the machine for material development. The University of Texas-El Paso has tons of publications on different materials. The only real limit is that they need to be conductive, which means that some metal-ceramic alloys may not be processable by EBM”.

Other limitations are in calculating where using EBM actually makes economic sense. “For production costs and complexity, the per kilogram price of an aero-engine is the same price of silver”, Mr. Elfström points out. “If you look at the kilo price of an automobile is the same as a hamburger so other GE technologies, such as metal binder jetting, may prove more viable for large part batches.”

EBM technology
Launched at Formnext 2019, the PRS3D is one of the key elements in automating the EBM workflow.

The final goal is building tomorrow’s automated, digital, additive factories and in may ways EBM technology is already a few steps ahead. “We feel that most of the process is already quite automated since for about every 80 hours of printing there is about a 1 hour of manual labor to transition to more automated post-processing phases,” Mr. Elfström goes on. “We are of course looking at automating these transitions through automated carts and the new PRS30 powder handling system, which removes 80% of the powder.”

“Another key advantage of EBM is that parts don’t usually require thermal treatment to reduce thermal stresses since the thermal gradient during the build process is very low. Users may want to do heat treatments but only to improve the microstructure of the part.”


Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Davide Sher

Since 2002, Davide has built up extensive experience as a technology journalist, market analyst and consultant for the additive manufacturing industry. Born in Milan, Italy, he spent 12 years in the United States, where he completed his studies at SUNY USB. As a journalist covering the tech and videogame industry for over 10 years, he began covering the AM industry in 2013, first as an international journalist and subsequently as a market analyst, focusing on the additive manufacturing industry and relative vertical markets. In 2016 he co-founded London-based VoxelMatters. Today the company publishes the leading news and insights websites VoxelMatters.com and Replicatore.it, as well as VoxelMatters Directory, the largest global directory of companies in the additive manufacturing industry.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.