Aerospace AMMaterialsMoney & Funding

UC Santa Barbara Researcher Receives $3 Million to Develop Extreme 3D Printing Materials

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.


Tresa Pollock, chair of the materials department at UC Santa Barbara, has received one of 13 prestigious 2017 Vannevar Bush Faculty Fellowships from the U.S. Department of Defense (DoD). The award includes $3 million to fund five years of Pollock’s research, which is aimed at developing a 3-D platform for discovering new materials capable of operating in extreme environments such as those experienced by rockets, aircraft engines and hypersonic flight vehicles.

“I am very honored to be selected for this award, which is named after a visionary scientist who shaped the U.S. research infrastructure,” Pollock said. “I am also grateful for the research support this provides and for the support the DoD has provided for many of my previous research efforts. The Vannevar Bush Fellowship will allow us to pursue research in directions not possible with other types of research programs.”

The fellowship program provides awards to top-tier scientists from U.S. universities to conduct revolutionary “high risk, high pay-off” research that addresses the “hard” problems that DoD needs to solve.

For example problems such as those experienced by the Space Shuttle hitting the Earth’s atmosphere on its return trip from the cosmos, traveling at 17,000 miles per hour— 25 times the speed of sound. Were it not for the protection of the ceramic tiles that acted as heat shields, the entire spacecraft would have burned to nothing. Those are exactly the kinds of the conditions UC Santa Barbara scientist Tresa Pollock often has in mind as she seeks to discover new and better materials.

“For Tresa Pollock to receive a prestigious Vannever Bush Award from the U.S. Department of Defense is a tremendous and well-deserved honor. I have no doubt that the funding that comes with the fellowship will enable her and her team to develop breakthroughs in 3D printing, nanoscale analysis and efficient production of important new materials.” Rod Alferness, dean of UCSB’s College of Engineering.

In recent years, it has become possible to use both laser and electron beams to “print” engineering objects that have complex shapes. The process involves melting and fusing metallic powder particles — each about 10 times finer than a grain of beach sand — in millimeter-scale “pools” created by local focusing of a laser or electron beam.

“Printing advanced materials into complex architectures on demand poses many technical challenges, and this fellowship will enable us to tackle what are currently limiting materials-science issues,” Pollock said. “The award builds on our previous research on crystal growth and solidification, 3-D materials science and alloy design. These intellectually challenging areas of research are highly suited to the talented Ph.D. students at UCSB.”

Drawing from the entire periodic table, it would be possible to mix and print millions of metallic powders having different combinations of elements. But until now, Pollock explained, it has been possible to print with only six or seven types of powders. Not enough was known, she said, about the complex series of events that occur during the melting, mixing and vaporization of the material that occur when the powder bed is scanned by a high-intensity beam, and afterward as the material cools.

“The grand challenges for making materials in this fashion are twofold and three-dimensional,” Pollock said. “We need to design material compositions in which defects will not form during melting and cooling within the cubic-millimeter pool, and we need 3-D tools to examine the structure of that millimeter-scale volume of material at the nanometer scale to ensure that the structure is sound. The Vannevar Bush fellowship will enable us to focus on these two aspects of the printing problem.”

Building upon a combined laser and electron-beam tomography system she developed at UCSB, Pollock will design and integrate an additional open-source, highly automated laser-powder-processing platform that can be operated either in layer-by-layer additive build mode for a given material, or in combinatorial chemistry mode to vary chemistry locally.

According to Pollock, the 3D platform will enable exploration of previously inaccessible design spaces of higher-dimensional compositional materials and will also provide rapid acquisition of 3-D information about the materials’ chemistry, structure and crystallography — from the nanometer-to-millimeter length scales critical in emerging approaches to additive manufacturing.

Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Anthony Lowder

Anthony has been following the industry since 2010. He works with the editorial team and is responsible for co-ordinating and publishing digital content on our international website. As well as following the tech landscape, he is a self-taught multi-instrumentalist and music producer.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.