3D Printing Service ProvidersMetal Additive Manufacturing

XJet Carmel metal AM system purchased by Azoth

High-definition parts for industrial production cited as drivers for the investment

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

Additive manufacturing specialist Azoth has received XJet’s first Carmel 1400M metal AM System – currently, the only metal and ceramic material jetting system in the world using material jetting technology. Repeatable, quality parts suitable for industrial production were the main reasons cited by Azoth for the investment. “We have a huge wealth of experience in metal manufacturing – with both additive and subtractive processes. XJet’s Carmel metal AM system delivers capabilities that are in high demand in the market, but are not achievable with other technologies,” asserted Scott Burk, Azoth CEO, “Parts with fine features, high resolution, good surface finish right off the printer – at a level we have not seen before. The ease-of-use and safety working with the XJet system, which does not involve handling powders, is another important factor for us”.

Azoth 3D is supported by the EWIE group of companies (EGC) who are specialists in high volume metal manufacturing for some of the biggest manufacturers in the world including Ford, Chrysler, John Deere, and Rolls Royce. Azoth was established when EGC leaders realized additive manufacturing would eventually replace subtractive methods. “With additive manufacturing, anything you can think of you can make. And now, not only can you think it, but you can mass-produce it,” said Burk.

Burk and Cody Cochran – Azoth General Manager and Co-Founder – were screening the market looking for a solution to serve market demand for small, complex, high-definition parts, which they couldn’t do with existing powder-bed fusion or binder jetting systems. “My eureka moment came when we got some test parts through from XJet and I asked the team how they looked, and they responded that they were the best they’d ever seen. What we really liked was the small holes, very sharp corners, very refined surface finish without needing any post-processing,” commented Cochran, adding, “We’re also impressed with the science behind XJet’s NanoParticle Jetting technology. It prints with very small particles, smaller than other technologies. These characteristics allow for process advantages, smaller layer heights, and smaller features”.

XJet Carmel metal AM system purchased by Azoth, with high-definition parts for industrial production cited as drivers for the investment

Hanan Gothait XJet CEO mentioned: “We have developed the only metal AM technology available today based on the concept of direct material jetting. After amazing success with the XJet ceramic systems, we are now ready for the bigger dream, bringing to the market our metal solution. It gives me great pleasure to know that our first user of the metal AM system is Azoth, with so much experience in metal manufacturing and in metal AM. Getting the recognition from such a market leader for the quality of parts we can make has made the entire journey, and the long wait for this system, worthwhile.”

In addition to the quality of parts, Azoth expects to see operational advantages with the XJet Carmel metal AM system, “One of the main advantages of Azoth’s approach is going from prototype to production with the same process, which XJet technology is perfectly suited to support,” asserted Cochran. “We will be able to take parts from a multitude of industries, such as automotive, medical, tooling, etcetera, and prototype them, refine them into end-use components, and bring them to production with the same machine. No expensive additional tooling or lengthy lead times. Making end-user parts requires precision, accuracy, and repeatability from part to part. By almost automating the entire workflow, as XJet does, we think we can achieve true repeatability.”

XJet CBO Dror Danai commented: “Azoth is all about pushing the boundaries of what’s possible in additive manufacturing, so they’re the perfect customer for our first metal AM system. Azoth is a unique operation that already has extensive experience in metal – both traditional and additive manufacturing – and is deeply involved in the manufacturing of the parts made for its customers, selecting the most appropriate technology, and developing the applications. I’m eager to see how they will use the system and the new groundbreaking applications they already tested and are eager to further develop.”

On 16th May 2022, just before the Rapid+TCT show opens its doors, interested parties can see the XJet Carmel 1400M live, producing premium parts in stainless steel, at an open house hosted by XJet at Azoth’s Ann Arbor facility.

Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Andrea Gambini

Andrea has always loved reading and writing. He started working in an editorial office as a sports journalist in 2008, then the passion for journalism and for the world of communication in general, allowed him to greatly expand his interests, leading to several years of collaborations with several popular online newspapers. Andrea then approached 3D printing, impressed by the great potential of this new technology, which day after the day pushed him to learn more and more about what he considers a real revolution that will soon be felt in many fields of our daily life.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.