Additive ManufacturingElectric VehiclesSustainability

Sheffield researchers develop lighter 3D printed electric motor

The prototype leverages DfAM and a higher-percentage silicon electrical steel that reduces energy losses

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

Sheffield University researchers, working with collaborators at the University of Wisconsin-Madison, have developed the prototype of a new, lighter and more efficient 3D printed electric motor, using affordable metal PBF 3D printing technology, paving the way for future electric motors to increase their power using less material.

Demand for electric motors is rapidly growing and these innovations are crucial to pioneering the next phases of transportation electrification, for example for airplanes, where batteries will need to be lighter and motors will need to be more energy efficient.

The prototype, which uses a higher-percentage silicon electrical steel that reduces energy losses, was designed as part of a collaboration between Alexander Goodall, a doctoral student in the Department of Materials Science and Engineering; UW-Madison post-doctoral research assistant FNU Nishanth and their advisers, Professor Iain Todd and Eric Severson.

The prototype design consists of a stator, a circular-shaped object with prongs that wires can be wrapped around to create a magnetic field. The biggest design difference between the prototype and traditional stators can be seen in the prongs themselves, as they feature an intricate design of thin geometric lines meant to reduce energy loss.

The collaboration was initiated by Alexander when he met Nishanth at a conference in 2020 and realized they had what the other needed to realize this project: Sheffield had access to the printing technology to make UW-Madison’s knowledge in creating unconventional motors a reality.

Alexander Goodall at the University of Sheffield came up with the concept, and designed, developed and manufactured the stator, whilst researchers at the University of Wisconsin completed comprehensive testing, showing an improvement in torque density.

When the printed prototype was tested in October 2022, it was found that it was giving more torque than they thought was possible with less material. “When you have 30% lower mass, you would expect that your torque would also be lower … but that wasn’t the case,” Nishanth said. “So, this shows that you know you’re actually going to net torque density improvement in this machine and if we can further improve this, (making a more efficient 3D printed electric motor) would be a game changer.”

Traditional methods of creating stators in electric motors use a lamination process, where sheets of electrical steel are stamped out. What you get as a result is a stator stacked with laminations with tiny but visible ridge lines on the top of the prongs.

That method, though easily replicated, tends to rely on using an electrical steel alloy with 3% silicon in it, which lends to higher rates of energy loss and less efficiency. An electrical steel alloy made with 6.5% silicon, recommended by the U.S. Department of Energy, reduces energy losses but is more brittle and is less likely to withstand the traditional lamination process.

But with 3D printing, there’s no need for tons of pressure to be exerted during rolling and the machine can print the delicate pattern on the small 10-kilowatt prototype stator within 20 hours. While that wouldn’t be enough energy to run an electric vehicle, the model could be easily scaled up to reach 40 kilowatts and still printed faster on an industrial printer.

Alexander said: “This project has shown the large potential that additive manufacturing has for electrical machines, with lightweight, efficient structures that have never before been possible using any other manufacturing technique. It was a pleasure to work with the team at WEMPEC (an internationally renowned power electronics research and electric machines research group located at UW-Madison) to turn this idea into a reality”

Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Davide Sher

Since 2002, Davide has built up extensive experience as a technology journalist, market analyst and consultant for the additive manufacturing industry. Born in Milan, Italy, he spent 12 years in the United States, where he completed his studies at SUNY USB. As a journalist covering the tech and videogame industry for over 10 years, he began covering the AM industry in 2013, first as an international journalist and subsequently as a market analyst, focusing on the additive manufacturing industry and relative vertical markets. In 2016 he co-founded London-based VoxelMatters. Today the company publishes the leading news and insights websites and, as well as VoxelMatters Directory, the largest global directory of companies in the additive manufacturing industry.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.