AM ResearchMetal Additive ManufacturingMetals

Researchers 3D print 17-4 PH steel using X-ray diffraction

Examining the rapid phase changes of materials as the steel was being printed, at the Advanced Photon Source (APS), at the Argonne National Laboratory

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

Durability is a critical characteristic of the materials used to produce industrial machinery, marine vessels, aircraft, and medical devices. For these applications, manufacturers rely on a particular type of stainless steel known as 17-4 PH – for its remarkably strong and corrosion-resistant properties. Now, for the first time, researchers at the Argonne National Laboratory have found a way to consistently produce 17-4 PH steel using 3D printing methods, while retaining all the material’s high-value characteristics. A paper based on the study was published in the journal Additive Manufacturing.

The scientists turned to the Advanced Photon Source (APS), a US Department of Energy (DOE) Office of Science user facility at DOE’s Argonne National Laboratory, to achieve this breakthrough. Using a technique called X-ray diffraction, scientists from Argonne, the US Department of Commerce’s National Institute of Standards and Technology (NIST), and the University of Wisconsin-Madison, were able to examine the subtle, rapid phase changes of materials as the steel was being printed. This allowed them to monitor and direct the formation of its structure and determine its performance.

This research stands to help manufacturers use 3D printing to reduce costs and increase flexibility compared to traditional casting methods. It also sets the stage for the 3D printing of other high-performance alloys, such as titanium alloy and nickel-based superalloy.

Researchers 3D print 17-4 PH steel using X-ray diffraction at the Advanced Photon Source (APS), at the Argonne National Laboratory.
The X-ray diffraction setup at the APS 1-ID beamline during the research group’s experiments related to 3-D printed steel. Image credit: Lianyi Chen/University of Wisconsin.

During the metal 3D printing process, temperatures change quickly, making the crystal structure of the atoms within the material difficult to observe. When 3D printing 17-4 PH steel, the crystal structure must be of a precise composition. The PH stands for precipitation hardening, a heat treatment technique used to make malleable materials stronger, and the numbers refer to the alloy’s makeup: 17% chromium and 4% nickel. The structure of 17-4 PH steel includes nanoparticles that contribute to the material’s signature strength.

“When a material cools very fast during 3D printing the way 17-4 PH steel does, manufacturers previously struggled to understand it well and couldn’t predict what they were going to get,” said Lianyi Chen, an associate professor in the Mechanical Engineering department at the University of Wisconsin–Madison, who was part of the research team. ​“The APS played a critical role, allowing us to see the material’s transformation behavior, even in these fast-cooling conditions. We can now do real-time monitoring to see the structure change.”

Using the high-energy X-ray beams that the APS produces, ​the team “can now actually look inside the metal as it’s being made to observe phase formation sequences. These have significant impact on the final properties of the steels,” said Andrew Chihpin Chuang, a physicist in the X-ray Science division at Argonne.

Because the changes, at the atomic level, during 3D printing happen so rapidly, the researchers needed an equally fast investigation technique. ​“We can observe the microstructure development in real-time due to the high brightness of the APS,” said Peter Kenesei, a physicist in Argonne’s X-ray Science division. ​“The researcher can quickly make decisions to adjust the printing parameters in order to obtain a desired microstructure.”

According to the Argonne National Laboratory, the researchers believe their results show how user facilities such as the APS can enable the United States to have a competitive edge in pushing forward the next generation of advanced manufacturing technologies.

“We hope our success with this study helps increase the industrial impact of the research coming out of American synchrotron user facilities such as the APS,” said Fan Zhang, a physicist at NIST. ​“If we want to establish American leadership in advanced manufacturing, these facilities are a great asset. Additive manufacturing opens up the design space, allowing us to create complex parts that are often impossible when using conventional technologies. That’s the true promise of this breakthrough.”

A paper based on the study was published in the journal Additive Manufacturing.

Research
Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Edward Wakefield

Edward is a freelance writer and additive manufacturing enthusiast looking to make AM more accessible and understandable.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • PHPSESSID
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Save
Accept all Services

Newsletter

Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.