AM for SpaceAM Press Releases

Portland State Aerospace Society’s (PSAS) OreSat0 CubeSat gets to orbit

Thanks to a turnstile antenna assembly, a star tracker camera lens and sensor assembly, and a battery assembly that were all 3D printed with Windform LX 3.0

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

3D printed components have been manufactured by CRP USA, for the Portland State Aerospace Society’s (PSAS) OreSat0 CubeSat, Oregon’s first satellite, which was deployed into low earth orbit in March 2021 and successfully operating since then. A turnstile antenna assembly, a star tracker camera lens and sensor assembly, and a battery assembly were all 3D printed with Windform LX 3.0. These assemblies all met the extreme vibration, outgassing, and thermal performance requirements for low earth orbit

3D printing in space

The small satellite or ‘nanosatellite’ revolution is here. Kilogram-class satellites, like CubeSats, now have functionality that was only available in larger (100 to 1,000kg) class satellites. Recently, 3D printing has helped speed up this revolution, especially within universities. CubeSats have been launched by dozens of countries, universities, and companies all around the world, and the state of Oregon joined them recently thanks to the Portland State Aerospace Society that built OreSat0 – their very own artisanally hand-crafted CubeSat system, currently in low Earth orbit. This achievement was possible thanks to their use of Windform LX 3.0 composite material and industrial 3D printing in their most critical subsystems.

The OreSat bus project

The Portland State Aerospace Society is an open-source, interdisciplinary student aerospace project at Portland State University in Portland, Oregon, with collaborators at most other Oregon universities. They make sophisticated amateur rockets, small liquid-fuel rocket engines, and CubeSat nanosatellites.

The society currently has three satellite missions in the works. All of them rely on the fully open-source OreSat bus which they are offering as an inexpensive (for a satellite) ‘DIY’ platform for designing and building 1U through 3U CubeSats – paving the way for a solution to the ‘COTS vs DIY’ dilemma.

“OreSat is our fully open-source, modular, and re-usable CubeSat system designed for educational teams”, said PSAS members. “OreSat uses a card cage system, which allows cards to be reused on different missions from 1U to 3U CubeSats. Cards include everything you would expect aboard a CubeSat: an onboard computer with multi-band radios, a battery pack, a star tracker, a GPS receiver, and the beginnings of an attitude determination and control system (ADCS). Solar modules are mounted on the outside of the Aluminum frame, along with deployable omnidirectional antennas.”

OreSat0 was deployed into low earth orbit on March 15th, 2021, and has been successfully operating since then. OreSat0.5 is being readied for flight in October 2023, and OreSat1 is scheduled for deployment from the international space station in early 2024.

Portland State Aerospace Society’s (PSAS) OreSat0 CubeSat gets to orbit. Thanks to the Windform LX 3.0 - a glass fiber reinforced material.
Portland State Aerospace Society’s OreSat0 CubeSat.

The project

The Portland State Aerospace Society is determined to develop better students through hands-on interdisciplinary systems engineering projects. Everything is designed, built, and tested by interdisciplinary student teams: mechanical engineers work on the structure, thermals, and CAD, Electrical engineers design the cards made of PCBs (standard two and four layers boards), and computer science students program the Linux boxes and microcontrollers that run the CubeSat.

PSAS members added, “There are very few open-source satellites in the world, and ours is probably the most fully-featured. We are currently collaborating with four other universities who are building satellites and ground stations based on our projects.”

Using industrial 3D printing and Windform

Before employing Selective Laser Sintering and Windform LX 3.0 for manufacturing subsystems on OreSat0, PSAS members used other technologies. “We designed and manufactured the parts locally using extremely inexpensive FDM machines until we prototyped a design that worked. We then switched to SLS 3D printing, which worked extremely well. But we couldn’t find SLS parts that could stand the temperature extremes and that were vacuum rated to NASA and ESA outgassing standards. We were absolutely thrilled to find CRP Technology’s Windform LX 3.0 composite material and CRP USA. With Windform LX 3.0, we could design the parts for 3D printing, run quick turns to prototype on local printers, and then print our final engineering and flight units out of Windform. It absolutely changed the way we design all parts of our satellite thanks to its characteristics: Windform LX 3.0 can be used in space; it has extremely good material properties; it is extremely easy to work with; it is far superior to other 3D printing materials, including the other FDM, SLA, and SLS technologies that we’ve used.”

OreSat0 systems printed in Windform LX 3.0

The team chose Windform LX 3.0, a glass fiber reinforced material from the Windform TOP-LINE range of composite materials for the Powder Bed Fusion 3D printing process (SLS). It allowed the PSAS team to use 3D printing processes on their critical subsystems, including their extremely reliable deployer for their tri-band turnstile antenna. The antenna has three separate antennas (UHF at 436.5 MHz, L band at 1.265 GHz, and L1 at 1.575 GHz) each with 4 elements; all 12 of these elements are deployed using nylon monofilament lines and only a single melt resistor. According to the team, “There was no way we would have been able to get the packing density of three bands with four elements each in anything other than a 3D printed, non-conductive process. We don’t know of any other satellite with this kind of antenna density.”

Star tracker lens and sensor assembly

Using CRP’s Windform LX 3.0, PSAS members were able to mount their star tracker sensor and lens on a small daughterboard that kept the entire assembly to a single 10 mm tall card form factor.

Battery pack

The battery pack needed to reliably hold 18650 cells through vibration testing while also providing thermal and electrical insulation from the rest of the satellite. Windform LX 3.0 allowed PSAS to make an extremely compact battery assembly that was still extremely rugged.

Testing performed on Windform parts

Before integration into the launch vehicle, OreSat0 (with 3D printed parts in Windform LX 3.0) was subjected to the following testing: Three-axis 14 g random vibration, -40 to +80 °C thermal cycling, and vacuum cycling. Windform performed flawlessly for all of these tests. “And of course, continue to perform in low earth orbit for the last year,” added PSAS members.

Advantages of Windform LX 3.0

The PSAS team recognized three crucial advantages of Windform LX 3.0 and industrial 3D printing technology/SLS process.

The SLS process provides robust parts that can take environmental testing, including 14 g of random vibration in all three axes and thermal vacuum cycling from -40 to +80 C; the Windform LX 3.0 provides critical outgassing compliance that’s not available with any other SLS process; and Windform LX 3.0 provides a non-conductive assembly that can be safely used next to electrical components, such as PCBs, batteries, and antennas.

According to the students, “Working with nanosatellites means extremely limited volume for all systems, so the ability to evolve and maximize the use of our space has been very beneficial. We pack a lot into a small space, and we can plan to use nearly every cubic millimeter when we can use 3D printed parts. Committing to the ‘final’ design is always a tricky step – have we thought everything through?? Once we have the part in hand, it is much more difficult to make changes. Luckily, 3D printing is the fastest way to revise parts if something goes wrong.”

Research
Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

VoxelMatters

VoxelMatters is the online trade media portal published by 3dpbm, a leading marketing and market research firm specializing in the AM industry. 3dpbm also publishes the 3D Printing Business Directory, the AM Focus eBook series and the 3dpbm Research AM Market Reports. 3D Printing Media Network was founded with the goal to provide the latest industry news, insights and opinions to a global audience of professionals and decision makers.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • PHPSESSID
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Save
Accept all Services

Newsletter

Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.