Automotive AMCase StudiesIndustrial Additive ManufacturingMetal Additive Manufacturing

Naples ANM trolleybuses implement on-demand 3D printed spare parts

AM service provider 3DnA redesigned and produced the parts for obsolescence management

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

ANM (Azienda Napoletana Mobilità S.p.A.), the traditional Neapolitan public transport company, is collaborating with local AM service provider 3DnA to restore and maintain the mobility of its lines in the city of Naples. The production of needed replacement parts was made possible by re-engineering and 3D printing mechanical components no longer available from their supply chain, where the original technical documentation and drawings could not be recovered.

3DnA Each trolley bus is connected to the power supply cable lines via a “Trolley Head”, which takes the current and mechanically guides the rods which are fixed on the bus’ roofs. Without a functional Trolley Head, the bus cannot operate.

With no more spare Trolley Heads available on the market, and lead times of more than 12 months with traditional manufacturing methods, the bus fleet would be grounded for months and citizens of the metropolitan city of Naples (3 million inhabitants) would have not been able to access this safe and environmentally friendly means of public transport.

As Ing. Pierpaolo Martino (Director of Operations of Tram&Bus Naples, A.N.M.) heard about the capabilities of additive manufacturing, he contacted Ing. Alessandro Manzo (General Manager of 3DnA Srl.) in order to launch this project aimed at re-engineering and manufacturing the Trolley Heads.

The 3D printed Trolley Heads with Materialise supports

As very little data was available from the original design – apart from some old Trolley Heads in the ANM warehouse – 3DnA carried out a preliminary reverse engineering process via a 3D Laser Scan to reconstruct the Trolley Heads in a 3D modeling software. For the design phase of the 3D printing job, 3DnA used Materialise Magics software (“SG + “and” Simulation” modules), which allowed a considerable optimization of the metal printing process in terms of orientation and support optimization.

A team of engineers from both companies, coordinated by Ing. Mariano Abbate (3DnA) and Ing. Gianluca D’Antona (Maintenance Manager A.N.M.), agreed on the first models and printing of the first prototype, at 3DnA’s AM facility, commenced. 3DnA’s recently renovated 1.000 sqm plant is located in the industrial zone of Pomigliano d’Arco and hosts two of the largest and 3D printing systems in the world.

An SLM500 with 4 lasers from SLM Solutions Group was used for aluminum parts (AlSi10Mg Alloy) while the Fortus F900 FDM system from Stratasys was used for the plastic parts (in ULTEM 9085).


A.N.M tested the prototypes and, in June 2020, they were sent for approval by the Italian Transport Office. Production commenced and, to date, two types of Trolley Heads have been re-engineered and manufactured by the dozens.

“Again 3D printing has proven its worth as a valid alternative technology to traditional means of manufacturing,” explained Alessandro Manzo. “It significantly reduced time to market, to achieve cost savings and greatly increased the ‘convenience’ of component design and production workflow for the companies and engineers involved in the project.”

Thanks to 3D printing, the ANM’s fleet of trolleybuses can keep rolling and continue to provide affordable, sustainable and reliable transportation for the citizens of the beautiful Southern Italian metropolis.

Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Davide Sher

Since 2002, Davide has built up extensive experience as a technology journalist, market analyst and consultant for the additive manufacturing industry. Born in Milan, Italy, he spent 12 years in the United States, where he completed his studies at SUNY USB. As a journalist covering the tech and videogame industry for over 10 years, he began covering the AM industry in 2013, first as an international journalist and subsequently as a market analyst, focusing on the additive manufacturing industry and relative vertical markets. In 2016 he co-founded London-based VoxelMatters. Today the company publishes the leading news and insights websites and, as well as VoxelMatters Directory, the largest global directory of companies in the additive manufacturing industry.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.