Medical ResearchResearch & Education

Nanoscribe shows off 3D printed microvalve for treating glaucoma

Mexican researchers produced it using the GT Professional 2PP nano 3D printer

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

Scientists and engineers at the Fundación Markoptic in Culiacán, Mexico and the Universidad Nacional Autónoma de México (UNAM), Mexico City, have fabricated a novel 3D printed microvalve device that could reduce the effects of glaucoma. They used Nanoscribe’s 3D printer to create a complex microvalve that is only 300 µm in diameter.
Glaucoma is the world’s second cause of irreversible blindness after cataracts. The World Health Organization estimates that 4.5 million people worldwide are blind due to glaucoma. In some cases, glaucoma is a condition caused by increased pressure in the eye, damaging the optic nerve. This nerve transfers information from the retina, the light-sensitive layer in the eye, to the brain. Over a long period of time, the damage of the optic nerve would gradually cause the loss of vision.

To tackle this condition, researchers from the Fundación Markoptic developed a microscopic device that could reduce the intraocular pressure and prevent the condition to develop into a more serious disability. For the fabrication of the device, they started a collaboration with the Laboratorio Nacional de Soluciones Biomiméticas para Diagnóstico y Terapia (LaNSBioDyT) at the UNAM that have the expertise and facilities for microfabrication.

3D printed microvalve
Scanning electron micrograph displaying a cross-section of a glaucoma microvalve. Image: LaNSBioDyT, Facultad de Ciencias, Universidad Nacional Autónoma de México

The microvalve was conceived by the president of the Fundación Markoptic, Manuel Gallardo Inzunza. He suffered from glaucoma at birth and lost his sight 13 years ago, despite five corneal transplants. The design that he invented is inspired by an internal combustion engine of the airplane. The modified and miniaturized replica was developed to expel the aqueous humor from the eye, freeing the eye pressure. At the same time the microvalve uses a spring to control constant flow and intraocular pressure in a similar manner as the intake valve of a gasoline engine.

The device consists of three components: a valve structure with a liquid outlet, a flexible spring and the valve housing that holds the parts together. The valve is only 300 micrometers in diameter and very difficult to fabricate with traditional techniques at this scale. With the use of a Nanoscribe’s 3D printer, scientists were able to fabricate the microdevice with finest details. All parts were printed separately, matching the size and geometry requirements to assemble them into one functional component and perform as expected, in the correct pressure range.

The advances in the fabrication of this novel microdevice open the way to further investigations of the microvalve functionality and biocompatibility. Researchers work in parallel on the development of artificial cornea models that will simulate the properties of the eye by mimicking the pressure differences to test the microvalve and identify possible difficulties or side effects of the device.

Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Davide Sher

Since 2002, Davide has built up extensive experience as a technology journalist, market analyst and consultant for the additive manufacturing industry. Born in Milan, Italy, he spent 12 years in the United States, where he completed his studies at SUNY USB. As a journalist covering the tech and videogame industry for over 10 years, he began covering the AM industry in 2013, first as an international journalist and subsequently as a market analyst, focusing on the additive manufacturing industry and relative vertical markets. In 2016 he co-founded London-based VoxelMatters. Today the company publishes the leading news and insights websites and, as well as VoxelMatters Directory, the largest global directory of companies in the additive manufacturing industry.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.