MIT researchers improve reliability of complex 3D printed parts

According to MIT, researchers have created a way for 3D models to account for 3D printing’s limitations during the design process. In experiments, they showed their approach could be used to make materials that perform much more closely to the way they’re intended to.

“If you don’t account for these limitations, printers can either over- or under-deposit material by quite a lot, so your part becomes heavier or lighter than intended. It can also over- or underestimate the material performance significantly,” said Gilbert W. Winslow Associate Professor of Civil and Environmental Engineering, Josephine Carstensen. “With our technique, you know what you’re getting in terms of performance because the numerical model and experimental results align very well.”

The approach is described in the journal Materials and Design, in an open-access paper co-authored by Carstensen and PhD student Hajin Kim-Tackowiak.

3D printing allows materials to be made with more complex internal structures. “3D printing processes generally give us more flexibility because we don’t have to come up with forms or molds for things that would be made through more traditional means like injection molding,” said Kim-Tackowiak.

Theory meets reality

As 3D printing has made production more precise, so have methods for designing complex material structures. One of the most advanced computational design techniques is topology optimization, which has been used to generate new and often surprising material structures that can outperform conventional designs, in some cases approaching the theoretical limits of certain performance thresholds. It is currently being used to design materials with optimized stiffness and strength, maximized energy absorption, fluid permeability, and more.

But topology optimization often creates designs at extremely fine scales that 3D printers have struggled to reliably reproduce. The problem is the size of the print head that extrudes the material. If the design specifies a layer to be 0.5 millimeters thick, for instance, and the print head is only capable of extruding 1-millimeter-thick layers, the final design will be warped and imprecise.

Another problem has to do with the way 3D printers create parts, with a print head extruding a thin bead of material as it glides across the printing area, gradually building parts layer by layer. That can cause weak bonding between layers, making the part more prone to separation or failure.

The researchers sought to address the disconnect between expected and actual properties of materials that arise from those limitations.

“We thought, we know these limitations in the beginning, and the field has gotten better at quantifying these limitations, so we might as well design from the get-go with that in mind,” said Kim-Tackowiak.

In previous work, Carstensen developed an algorithm that embedded information about the print nozzle size into design algorithms for beam structures. For this paper, the researchers built off that approach to incorporate the direction of the print head and the corresponding impact of weak bonding between layers. They also made it work with more complex, porous structures that can have extremely elastic properties.

The approach allows users to add variables to the design algorithms that account for the center of the bead being extruded from a print head and the exact location of the weaker bonding region between layers. The approach also automatically dictates the path the print head should take during production.

The researchers used their technique to create a series of repeating 2D designs with various sizes of hollow pores, or densities. They compared those creations to materials made using traditional topology optimization designs of the same densities.

In tests, the traditionally designed materials deviated from their intended mechanical performance more than materials designed using the researchers’ new technique at material densities under 70%. The researchers also found that conventional designs consistently over-deposited material during fabrication. Overall, the researchers’ approach led to complex 3D printed parts with more reliable performance at most densities.

“One of the challenges of topology optimization has been that you need a lot of expertise to get good results, so that once you take the designs off the computer, the materials behave the way you thought they would,” said Carstensen. “We’re trying to make it easy to get these high-fidelity products.”

A new design approach

The researchers believe this is the first time a design technique has accounted for both the print head size and weak bonding between layers.

“When you design something, you should use as much context as possible,” said Kim-Tackowiak. “It was rewarding to see that putting more context into the design process makes your final materials more accurate. It means there are fewer surprises. Especially when we’re putting so much more computational resources into these designs, it’s nice to see we can correlate what comes out of the computer with what comes out of the production process.”

In future work, the researchers hope to improve their method for higher material densities and for different kinds of materials like cement and ceramics. Still, they said their approach offered an improvement over existing techniques, which often require experienced 3D printing specialists to help account for the limitations of the machines and materials.

“It was cool to see that just by putting in the size of your deposition and the bonding property values, you get designs that would have required the consultation of somebody who’s worked in the space for years,” said Kim-Tackowiak.

The researchers say the work paves the way to design with more materials. “We’d like to see this enable the use of materials that people have disregarded because printing with them has led to issues,” said Kim-Tackowiak. “Now we can leverage those properties or work with those quirks as opposed to just not using all the material options we have at our disposal.”