Advanced MaterialsAM ResearchMaterialsMedical Research

MIT engineers 3D print tunable meshes for ankle and knee braces

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

3D printing technologies are leading to impressive innovations in the medical sector, largely because of their ability to produce patient-specific models, implants and devices. A recent research development out of MIT could push the envelope even further for AM in healthcare, leading to new bespoke medical products, such as ankle or knee braces.

MIT engineers have developed 3D printed mesh materials whose properties can be tuned to mimic or support the toughness and flexibility of soft tissues in the human body, such as muscles and tendons. The 3D printed materials can be tailored by adjusting their intricate structures and could have applications in the production of personalized ankle or knee braces and even implantable devices like hernia meshes.

The team demonstrated the 3D printed mesh materials by creating an ankle brace made from the tunable material. The brace was designed to prevent the wearer’s ankle from turning inward, while simultaneously allowing the joint to move in other directions. The MIT researchers also 3D printed a knee brace designed to fit the knee, even as it bends, and a glove with a 3D printed mesh sewn onto the top to conform with the wearer’s knuckles and provides resistance against involuntary clenching that can occur to patients after a stroke.

“This work is new in that it focuses on the mechanical properties and geometries required to support soft tissues,” explained Sebastian Pattinson, a postdoc researcher at MIT and lead author of the study. “3D printed clothing and devices tend to be very bulky. We were trying to think of how we can make 3D printed constructs more flexible and comfortable, like textiles and fabrics.”

Inspired by collagen

In addition to finding inspiration in textiles, the research team also drew from natural materials and specifically collagen, the structural protein found in the body’s soft tissues like ligaments, tendons and muscles. When observed under the microscope, collagen looks like it is made up of curvy intertwined strands, which, when stretched, straighten out.

The researchers sought to emulate the molecular structure of collagen by designing wavy patterns which could be 3D printed using a thermoplastic polyurethane (TPU) material. A mesh configuration could then be designed to resemble stretch but tough fabric.

The tunable properties of the material are achieved by modifying the wave structure: the taller the waves, the more the mesh can stretch at low strain before becoming stiff.

MIT 3D printed meshes ankle knee braces
(Photo: MIT | M. Scott Brauer)

Ankle tests

In testing the 3D printed mesh, the MIT team printed a long strip of the material to see how it would support the ankles of a number of healthy volunteers. Each person had a strip of the mesh adhered along the length of the outside of their ankle in an orientation conducive to supporting the ankle if it turned inward.

The volunteers’ ankles were then placed into an ankle stiffness measurement robot—aptly called Anklebot—which was developed in the lab of Neville Hogan, Sun Jae Professor in Mechanical Engineering. The robot subsequently moved each ankle in 12 directions and measured the force the ankle used with ever movement with and without the mesh.

These tests shed light into how the 3D printed mesh impacted the ankle’s stiffness in various directions. Ultimately, the researchers found that the mesh increased the ankle’s stiffness during inversion, while leaving it unaffected for movement in other directions.

“The beauty of this technique lies in its simplicity and versatility,” said associate professor of mechanical engineering A. John Hart. “Mesh can be made on a basic desktop 3D printer, and the mechanics can be tailored to precisely match those of soft tissue.”

Metal threads

Though the 3D printed meshes used for the supportive braces were made using flexible material, it is also possible to work with stiffer materials for creating implantable hernia meshes and other devices.

At this stage, the team has come up with a way to incorporate stronger and stiffer fibers into a pliable mesh structure by printing stainless steel fibers over certain sections of an elastic mesh, and then printing a third elastic layer on top of the steel to sandwich the stiff metal threads into the mesh.

According to the researchers, this approach enables the creation of meshes that can still stretch up to a point but provide extra strength and support when it stiffens. The combination meshes could be especially useful for products that prevent muscles from overstraining.

Fabric-like meshes

The researchers also devised a technique which imparted a fabric-like quality to the meshes As Pattinson explained: “One of the reasons textiles are so flexible is that the fibers are able to move relative to each other easily. We also wanted to mimic that capability in the 3D printed parts.”

This was achieved by slightly adjusting the traditional 3D printing process. That is, Pattinson realized that if the print nozzle was raised slightly after printing the first layer of a structure, the extruded material could take longer to land on the underlying layer, giving the material more time to cool and lose some of its stickiness. Using this technique, the team was able to print meshes that were not fully bonded and could move relative to each other.

Finally, the MIT researchers created meshes that incorporate auxetic structures, which become wider as you pull on them instead of contracting. This ability could have applications in supporting highly curved surfaces of the body, such as the knee.

“There’s potential to make all sorts of devices that interface with the human body,” Pattinson concluded. Surgical meshes, orthoses, even cardiovascular devices like stents—you can imagine all potentially benefiting from the kinds of structures we show.”

Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Tess Boissonneault

Tess Boissonneault is a Montreal-based content writer and editor with five years of experience covering the additive manufacturing world. She has a particular interest in amplifying the voices of women working within the industry and is an avid follower of the ever-evolving AM sector. Tess holds a master's degree in Media Studies from the University of Amsterdam.

Related Articles

One Comment

  1. Fabric-like meshes appear to be printed as ‘separate’ individual layers. The first layer represents the form and base structure using a 2D file format and a ‘raised’ or Three-Dimensional ink or print material . The second material printed is another single layer of metal Three-Dimensional material using a different ejector mechanism and the same 2D file format. Then a final layer is 2D printed with the original material ejector. The Mesh is formed as a tri-layer of 3 separate single layers of material all printed with a 2D file. My understanding from this article is the printed layers are 2D and printed on top of each other with “raised or Three-Dimensional materials. This process of printing mesh appears to not require anything more than a 2D printer using ‘HotMelt or raised inks” when cooled. Other Additive Manufacturing (AM) technologies use this same approach to make 3D objects but the definition of 3D printing still states “multiple layers” must be printed from a CAD 3D file and we must consider changing the definition. 3D printing is not the same as AM. I believe any ink or deposition of ‘raised’ material is the definition of 3D printing and it requires only one layer or more. A one layer AM model is possible if the design calls for it. AM can only be defined by printing with Three-Dimensional materials. Three-Dimensional material is fundamental to AM and without it AM can not exist.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.