Construction 3D PrintingSustainability

Mighty Buildings awarded $5M to develop affordable 3D printed green housing

In partnership with Lawrence Berkeley National Laboratory and Habitat for Humanity, the funding from the California Energy Commission for the San Francisco Bay Area project

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

Mighty Buildings, a 3D printing construction technology company known for its prefabricated, environmentally friendly, and climate-resilient homes, along with partners led by Lawrence Berkeley National Laboratory (LBNL), has been awarded a $5 million GFO-22-305 grant from the California Energy Commission. The funding supports the partners’ work to develop, test, and demonstrate zero-carbon or near-zero-carbon, cost-effective, modular, and manufactured homes in Bay Point, California, in the San Francisco Bay Area, that can be readily deployed, particularly in under-resourced communities.

Mighty Buildings awarded $5M for 3D printed green housing in the San Francisco Bay Area project from the California Energy Commission.

The companies intend to develop three advanced prefabricated low-carbon townhouses that will benefit low-income families (80% AMI or less) via partner Habitat for Humanity. Mighty Buildings will construct the homes’ walls using its innovative 3D printing technology at its Oakland factory, and construction assembly is expected to be completed within a few days at the site location. The project’s research aims to drive long-term value in affordability, sustainability, resilience, and speed of construction via new features that can positively transform the industry, including:

  • A ‘cool room’ concept: Utilizing solar PV paired with a small battery, in tandem with a highly efficient envelope design and equipment, the homes will each feature a high-efficiency, mini-split heat pump system. The ‘cool rooms’ will reduce peak loads by shifting to low-power operation during times of acute grid stress, and by shifting the peak load from a concentrated single peak period in the evening to multiple scattered peak periods throughout the day. The goal will be to provide greater resilience through events like power outages and extreme temperature events while generating more consistent billing cycles and a 10-year lower total cost of ownership (TCO).
  • Mighty Buildings awarded $5M for 3D printed green housing in the San Francisco Bay Area project from the California Energy Commission.
    Mighty Buildings’ 3D printed housing components.

    Advanced 3D printing manufacturing techniques: The project aims to introduce new methods of offsite 3D printing manufacturing, as well as a new energy-efficient panel, which is expected to have the highest level of offsite completion in the industry.

  • Onsite structural/waterproofing test kits: Advanced testing equipment will be introduced to the manufacturing site, serving to accelerate innovation and certification cycle times.
  • Energy and general manufacturing cost model: LBNL plans to develop a first-of-its-kind model based on Mighty Buildings manufacturing inputs that could be applied more broadly toward future projects utilizing prefab, modular, and panelized industry solutions.
  • Training program: In collaboration with Mighty Buildings, Habitat for Humanity will create an in-person and digital training program to upskill labor and teach the basics of panelized prefab construction.
  • Reduced 10-year Total Cost of Ownership (TCO): The homes will target a 25% reduction in costs against a similarly sized home based on their zero-carbon and near zero-carbon footprints over a ten-year period – helping to pave a path for more affordable and resilient modular homeownership from underserved communities. The partners anticipate that these savings will grow to as much as 35% when scaled on larger projects.

“We are thrilled to embark on this groundbreaking project. Our collaboration with Lawrence Berkeley National Laboratory and Habitat for Humanity reflects our commitment to innovation, sustainability, and our community,” said Scott Gebicke, CEO of Mighty Buildings. “The support provided by this grant goes beyond building three townhomes; it’s actively shaping the future of construction in California. We envision a future where affordable, resilient, and energy-efficient homes are the standard, not an exception.”

Mighty Buildings awarded $5M for 3D printed green housing in the San Francisco Bay Area project from the California Energy Commission.

The San Francisco Bay Area homes are expected to be built much more quickly than traditional construction. For developers, the shorter build time and the associated interest savings are estimated to enable construction by as much as  20-30% more housing units. For home operations, the total utility savings is estimated to be as much as 40%, with even greater savings expected for larger multi-family units due to scale. The partners plan to continue to develop their strategy and addition of new partners through 2024 with production slated for later that year.

Over the next year, Scott Gebicke predicts that: water conservation and embodied carbon will take center stage in sustainability conversations, as extreme weather events grow in frequency; we won’t yet see AI affect jobs onsite or in the factory; high capital costs, acute labor shortages, and continued insurance failures will drive developers toward greater predictability and efficiency in their decisions; and that the use of 3D printing technology within the real estate market will be increasingly preferred.

Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Edward Wakefield

Edward is a freelance writer and additive manufacturing enthusiast looking to make AM more accessible and understandable.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.