3D Printing ProcessesAerospace AMAM for Space

German Aerospace Center DLR gets ready to test metal PBF technology in zero-G conditions

Parabolic rocket-powered flight scheduled for this year

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

DLR, the German Aerospace Center, is getting ready to launch a parabolic flight that will test a completely new metal powder bed fusion additive manufacturing system for zero-G conditions that has been in development since 2017.  The machine is based on a tried and tested principle and designed as a payload for a research rocket. It will be and launched aboard a MAPHEUS rocket for the first time in 2020.

The subject of the DLR research project is the SLS/SLM process (Selective Laser Sintering or Selective Laser Melting), in which the desired component is formed from individual layers of metallic powder using a focused laser beam – layer by layer. The range of possible materials is very wide using this process, even if adjustments to the different machine parameters sometimes require a complex series of measurements.

One of the greatest challenges presented by this process in preparing for lower gravity, all the way up to full weightlessness conditions, is metal powder handling. This includes the targeted application of a densely packed powder layer with uniform thickness, as these parameters determine the quality and material properties of the finished component. This layer must also remain stable on the print bed until the laser process is complete and the next layer is applied. In order to achieve this goal, a gas flow is applied and the individual powder are effectively “sucked” onto the print bed. This method of stabilizing the powder through a pressure range has already been tested in various variations on previous parabolic flights and shows a high level of reliability.

Zero-G metal PBF
The DLR researchers during a previous zero-G parabolic flight test of AM that took place in 2017

This newly developed additive manufacturing unit for the upcoming experiment is fully automated, has an independent energy supply, it is robust enough to withstand the loads occurring during a rocket launch and it is light in weight. The manufacturing process can be monitored from the ground using a telemetry connection. The rocket payload and ground station will work side by side during the parabolic flight. In addition to testing the hardware for the first time under weightlessness, the experiment will also study the optimizing of system parameters for different, more demanding materials, such as solid metal glasses.

Additive manufacturing, also known as 3D printing, offers a wide range of options for manufacturing components from liquid, powder or filament shaped material. Materials from all classes, including metals, plastics and ceramics, but also composite materials, can be 3D printed. Technical market maturity has been achieved for more and more raw materials.

The advantages of this group of manufacturing processes depend heavily on the process used and the application. All in all, additive manufacturing can be used to manufacture a large number of components or tools from the same starting material, very flexibly and quickly. However one of the most important advantages for using AM in space is the ability to produce parts on location, at the desired location. As a result, applications in space travel – in Earth orbit or beyond, for example on the Moon or Mars bases and during the flights to get there – will be of great interest in the future of human space travel.

Such manufacturing processes, even if they are well-tried and ready for the market on Earth, are by no means trivial to adapt to reduced gravity conditions. On the one hand, there are fundamentally different requirements for the hardware of corresponding production machines, on the other hand, there are often more sophisticated materials that are used in space travel.


Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Davide Sher

Since 2002, Davide has built up extensive experience as a technology journalist, market analyst and consultant for the additive manufacturing industry. Born in Milan, Italy, he spent 12 years in the United States, where he completed his studies at SUNY USB. As a journalist covering the tech and videogame industry for over 10 years, he began covering the AM industry in 2013, first as an international journalist and subsequently as a market analyst, focusing on the additive manufacturing industry and relative vertical markets. In 2016 he co-founded London-based VoxelMatters. Today the company publishes the leading news and insights websites VoxelMatters.com and Replicatore.it, as well as VoxelMatters Directory, the largest global directory of companies in the additive manufacturing industry.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.