AM for SpaceAM PowdersMaterials

Martian rock-metal composite could enable 3D printing on Mars

Washington State University (WSU) researchers have printed parts using as little as 5%, up to 100%, Martian regolith mixed with a titanium alloy

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

A small amount of simulated crushed Martian rock, mixed with a titanium alloy, has been used to make a strong, high-performance material that could one day be used to 3D print tools or rocket parts on Mars. The parts were made by Washington State University (WSU) researchers with as little as 5%, up to 100%, Martian regolith – a black powdery substance meant to mimic the rocky, inorganic material found on the surface of the red planet.

According to Amit Bandyopadhyay, the corresponding author on the study that was published in the International Journal of Applied Ceramic Technology, the 3D printed parts with 5% Martian regolith were strong, while the 100% regolith parts proved brittle and cracked easily. Although the high-Martian content materials would still be useful in making coatings to protect equipment from rust or radiation damage.

In space, 3D printing is something that has to happen if we want to think of a manned mission because we really cannot carry everything from here,” said Amit Bandyopadhyay, a professor in WSU’s School of Mechanical and Materials Engineering. “And if we forgot something, we cannot come back to get it.”

Martian rock-metal composite could enable 3D printing on Mars. WSU researchers have printed Martian regolith mixed with a titanium alloy.
The surface of Mars. Image Credit: NASA/JPL-Caltech

Bringing materials into space can be extremely expensive. For instance, the authors noted it costs about $54,000 for the NASA space shuttle to put just one kilogram of payload (about 2.2 pounds) into Earth orbit. Anything that can be made in space, or on planet, would save weight and money – not to mention if something breaks, astronauts would need a way to repair it on site. This is exactly why, if humanity is to become a multi-planetary species, and if Mars is to be our second home, we will need to be 3D printing on Mars.

Amit Bandyopadhyay first demonstrated the feasibility of this idea in 2011 when his team used 3D printing to manufacture parts from lunar regolith, simulated crushed moon rock, for NASA. Since then, space agencies have embraced the technology, and the International Space Station has its own 3D printers to manufacture needed materials on site and for experiments.

For this study, Amit Bandyopadhyay, along with graduate students Ali Afrouzian and Kellen Traxel, used a powder-based 3D printer to mix the simulated Martian rock dust with a titanium alloy, a metal often used in space exploration for its strength and heat-resistant properties. As part of the process, a high-powered laser heated the materials to over 2,000 degrees Celsius (3,632 F). Then, the melted mix of Martian regolith-ceramic and metal material flowed onto a moving platform that allowed the researchers to create different sizes and shapes. After the material cooled down, the researchers tested it for strength and durability.

The ceramic material made from 100% Martian rock dust cracked as it cooled, but as Amit Bandyopadhyay pointed out – it could still make good coatings for radiation shields as cracks do not matter in that context. But just a little Martian dust, the mixture with 5% regolith, not only did not crack or bubble but also exhibited better properties than the titanium alloy alone, which meant it could be used to make lighter-weight pieces that could still bear heavy loads.

“It gives you a better, higher strength and hardness material, so that can perform significantly better in some applications,” said Amit Bandyopadhyay, noting that this study is just the start, and future research may yield better composites using different metals or 3D printing techniques.

“This establishes that it is possible, and maybe we should think in this direction because it’s not just making plastic parts which are weak but metal-ceramic composite parts which are strong and can be used for any kind of structural parts,” he said.

This research was supported by the National Science Foundation.

Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Edward Wakefield

Edward is a freelance writer and additive manufacturing enthusiast looking to make AM more accessible and understandable.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.