3D Printing ProcessesConsumer ProductsLFAM

Life-size 3D printing is now a thing: check out these amazing projects

These are big, now a dedicated community on Facebook tracks them all

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

It may have seemed impossible only a couple of years ago – due to high costs of hardware and materials – but life-size 3D printing is now something that consumers can do. It’s not easy, it takes time and dedication. But a growing community of enthusiasts has been creating some amazing projects and there is a dedicated Facebook community – aptly named Life-size 3D print – that tracks them all. We asked the community’s founder, Jeff Vaesken, to highlight some of the most impressive projects so far and they did not disappoint.

“Life Size 3D Print was born from a common passion, the ability to create whatever we dreamt of, Vaesken told 3DPMN. “This is why we aim to display all the biggest prints, from all around the world, as well as unite people within one group, one community of people sharing the same hobby: to dream big and dream together.”

The concept of “Life-size” can refer to a number of things, including both enormous print, as well as a fictional wearable helmet, or gauntlet. In other words, anything that is printed at a 1:1 scale. And it is not easy. Each print, can take hundreds, even thousands of hours of work and it’s not just about the printing.

“It all starts with printing the whole piece, but then you also have to factor in the post-treatment: assembling all the pieces, filling any gap and sanding the whole thing, to finally paint it, which can all double the amount of time each print takes,” Vaesken explains.

Dreaming big

Here are a few examples of Life-size prints that caught LS3DP’s eye, for the quality of the printing, polishing, and originality.

The first are two different Life-size Iron Man MK VII projects: one by Pietro Del Fiandra, which was made using three different printers, and is motorized using Arduino. Laurent Vaterkowski also produced a similar piece.

Above and in the gallery below, the Life-size Iron Man MK VII from Pietro Del Fiandra. Under, the Iron Man from Laurent Vaterkowski.

Life-size 3D printing

The second print highlighted by LS3DP is a fantastic C3PO from Star Wars, by Aurelien Volle. This print took 1,145 hours to be completed but the results are amazing.

Life-size 3D printing
The unmistakable robotic bust from C3PO and, in the gallery below, a sequence of the 3D printing and assembly process.

Another fascinating work is Dobby, by Fred Williams: Harry Potter’s best house elf brought to life in amazing details.

The next project mentioned is this life-size bust of the Joker, by Alex Cruz, as found on zsculptors.com. Mr. Cruz has a passion for evil clowns as he also recently created another bust: Pennywise from the movie It.

Life-size 3D printing

“There would not be enough time to mention all those gorgeous prints posted on the Life-size 3D Print community, and the awe I feel every time I see a new one, just as a kid watching a new episode of his favorite anime,” Vaesken says. “Thanks to all the members for sharing their work, and bringing dreams to life.”

GoT big?

The final project is still ongoing, and it is what Mr. Vaesken currently working on. It is a Game of Thrones scene of Daenerys and her dragon, modeled by Sanix and available at Malix 3D Design. He is printing it at 720% size of the original model, which will bring it to 1:1 scale. This means that the final work will be as tall as 2.5 meters, with an overall width of 3.8 meters, all resting on a 1.95-meter support. “I have started this project in February 2019, and I have 3 printers, running 24/7, Vaesken tells 3DPMN. “I have already run through 60 Kg of PLA.”

Life-size 3D printing

Vaesken says he started with small figures and then continued to print bigger and bigger. Recently, he confirms, the price of printers has been decreasing to the point where more people can get involved. “Especially the printers from China are now very competitive in terms of value for the money.

“For large format machines and for Life-size, I recommend the Creality CR10S 5 which has a 500 x 500 x 500 mm tray for a price between 700 and 800 euro,” Vaesken says. “Alternatively, the Creality S4 has a 400 x 400 x 400 build volume for a price of 550 euro. I personally use 2 Cr10S of 300 x 300 x400, along with one Cr10S 4 and one Alphawise U 20. A little piece info to clarify: the larger the printer, the harder it is to adjust.”

Filament has also become very reasonable in price with an average of 18 euro per kilogram for PLA which is relatively accessible to enthusiasts. That said, Life-size 3D printing is not for every purse. The starting budget is important because you also must consider the painting necessary to actually finish the prints, as well as costs associated with lots of glue. Indeed making a life-size print includes assembling a number of pieces and glues for PLA can be very expensive.

Although it has been improving somewhat, the speed of the machines remains a pain point. It is necessary to use nozzles measuring 0.6 to 0.8 mm to reduce the time of printing. “Accelerating the print speed will ruin the quality of the parts, thus it is better to lower the speed and increase the size of the nozzle,” Vaesken tells us. The biggest challenges, however, remain in the assembly and post-treatment, which are very heavy, especially sanding and finishing.”

This, however, is not stopping the dream of the LS3DP community of going bigger and bigger. The only question is how big can it really go?

Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Davide Sher

Since 2002, Davide has built up extensive experience as a technology journalist, market analyst and consultant for the additive manufacturing industry. Born in Milan, Italy, he spent 12 years in the United States, where he completed his studies at SUNY USB. As a journalist covering the tech and videogame industry for over 10 years, he began covering the AM industry in 2013, first as an international journalist and subsequently as a market analyst, focusing on the additive manufacturing industry and relative vertical markets. In 2016 he co-founded London-based VoxelMatters. Today the company publishes the leading news and insights websites VoxelMatters.com and Replicatore.it, as well as VoxelMatters Directory, the largest global directory of companies in the additive manufacturing industry.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.