EditorialsIndustrial Additive Manufacturing

Janne Kyttanen: if it ain’t broke, innovate

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

“If it ain’t broke, don’t fix it,” a common phrase we often hear, especially when something in business is working.

I think the opposite is true! Just when your business model is working, it’s time to put effort into shifting gears in the opposite direction.

The reality is that when your business is working, your future competition knows it and is relentlessly working on plans to make their business more efficient in an effort to put you out of business. Furthermore, a lot of industries and products are so commonplace that we tend to blindly accept how they are and fail to think whether they could actually be done better, more efficiently, cheaper or faster.

Let’s take an industry as commonplace as you can image: plumbing. We have all had our pipes get clogged and burst. When it happens, we accept it and most of us just think “it is what it is” and simply call the plumber.

What if we agreed not to accept it? There’s nothing wrong with being a plumber, but I simply don’t agree with the idea that we can’t have plumbing that would never burst or get clogged in the first place. If something goes in from one end, it must come out from the other…pretty much like with our own intestines.

The simple reason why shit gets clogged and pipes burst, is because the system is far from optimized and hasn’t changed for centuries. We have rubber hoses, straight tubes and a few connection pieces, which let your pipes turn 45, 60 or 90 degrees. That’s really it. If you do simple flow analysis of liquid through an elbow connection, you can clearly see turbulence and how inefficient it is.

Janne Kyttanen innovate

Without going too much into technical details, inefficient piping diminishes the efficiency of flow, which results in energy loss, which in turn causes higher energy costs and other inefficiencies.

Imagine you are setting up a factory and you could reduce your energy costs simply by optimizing piping on gas, air, water etc. and then 3D print all of them to fit. How would this picture look if it was all 3D printed and highly optimized?

Janne Kyttanen innovate
A detail of a large, modern factory with multi-coloured pipes

Now, picture the above scenario taking place for every single piping project on the planet, from water lines, to gas pipes, to electrical conduits. You can imagine the scale of possibilities where 3D digitization starts adding value.  

I can see countless possibilities where 3D printing could help. And let’s be clear, I know nothing about civil engineering of water pipes or gas lines, but I can assume that we could make pipes swirl, so air could help with the efficiency, or we could simply make pipes more transparent, so you would clearly see problem areas, should your shit get stuck.

Janne Kyttanen innovate

Yes, the naysayers will say: “It’s not regulated, it’s too expensive, 3D printed materials are not the same, plumbers would not wish to get into 3D etc. etc.” This is at once true and false. As a business leader, if you are going to get left behind during this phase of 3D innovation, when you already know we have technologies that can solve a lot of these issues, you are stuck in the past and it’s time to wake up. We are entering an exponential curve in price reduction, speed, material development and process efficiency when it comes to 3D printing.

What are the archaic industries where we have taken things for granted to which 3D printing could add tremendous value but maybe the timing wasn’t right, the materials were far too expensive or underdeveloped for that particular application? Leave me a comment or reach out to me! I would like to hear your thoughts.

Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Janne Kyttanen

Janne Kyttanen is a visionary and pioneer in the 3D printing industry. As founder of Freedom of Creation, he became one of the first designers to commercialize 3D printed products, including light fixtures, footwear, furniture, and much more. When Freedom of Creation was acquired by 3D Systems in 2011, Kyttanen took up the mantle as the company’s Creative Director, an influential position which he thrived in for 4 years. Now, Kyttanen puts his 3D expertise to another use, as co-founder and CEO of What the Future Venture Capital, a VC firm dedicated to designing tech startups specializing in cutting-edge technologies.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.