JOME 3D prints UAE’s first marine propeller using Vipra AM
The 26 kg stainless steel part was printed on the Caracol Vipra AM platform
Using Caracol’s Vipra AM robotic WAAM system, UAE-based ship repair company JOME Engineering has made the UAE’s first 3D printed marine propeller. JOME, headquartered in Dubai, offers ship repair and offshore sales services in the region, and has a dedicated fabrication team for the production of marine and industrial parts. Though it primarily uses subtractive equipment like CNC machines, plasma cutters and waterjet cutters at its facilities, the company also deploys a Caracol Vipra AM XP model for additive projects.
For this particular job, JOME’s client needed to replace a damaged propeller in the shortest time possible but lacked blueprints for the part in question. The time constraint meant the company couldn’t wait for die fabrication, so it 3D scanned the damaged propeller for additive manufacturing instead.

Fabrication on the Vipra AM took place at JOME’s Dubai facility, close to the vessel in need of the new part. Corrosion-resistant 316L stainless steel was used to print the propeller section by section, starting with the central boss. The printed boss was precision machined and then subject to a dye penetrant inspection to ensure there were no cracks, before three blades were printed on top, resulting in a final part weighing 26 kg and measuring 685 mm in diameter.
Printing the propeller instead of casting it resulted in a lead time reduction of about 60% and a cost reduction of about 40%.
According to JOME and Caracol, the most time-consuming part of the job was post-machining the printed blades, which took around 100 hours following the 20 hours of printing. This required constant re-scanning of the part to ensure alignment, though this had the added benefit of creating a documented record of the part at each stage of machining. The final steps involved hand grinding, pitch verification, and a final round of balancing.
This was not JOME’s first use of the Caracol Vipra AM XP, which it has had installed since at least 2025. The Dubai company has previously used the large-scale Cold Metal Transfer system to rapidly fabricate stainless steel valve bodies. At the time, JOME noted the advantage of WAAM for shortening lead times and reducing waste.
Caracol’s Vipra AM DED platform was first unveiled at Formnext 2024. The turnkey solution comprises hardware, software and automation, and comes in two models: the Extreme Productivity (XP) version used by JOME that deploys Cold Metal Transfer technology for a higher deposition rate; and the Extreme Quality (XQ) version that uses Plasma Arc Deposition for the highest level of precision. Caracol’s other major printing solution is the Heron AM platform for thermoplastic and composite parts.
The marine and maritime industries have long been an important area of focus for Caracol, an Italian company with a North American base in Pflugerville, Texas, as its large-format WAAM systems provide reliable options for both part fabrication and repair.




