3D Printer HardwareAM IndustryDistribution

Is the global shortage in computer chips going to hit 3D printers?

Some printheads parts are running low but could 3D printing also be part of the solution?

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

The global shortage of computer chips is reaching crisis levels, as reported by media around the world (such as this recent article from The Guardian). 3D printers and their 3D printing printheads are not immune. In fact, they risk getting hit fairly hard in the days and months to come, effectively canceling out some of the perceived benefits of local manufacturing, in the wake of global supply chain disruptions.

The shortage in computer chips was initially caused by the same supply chain interruptions that hit all manufacturing segments, however now the issue is much more endemic: the massive global change in habits driven by pandemic, which forced people to stay home and interact and get their entertainment only via computers, has caused an unprecedented growth in electronic chip demand. A demand that no manufacturers are able to address.

Electronic challenges

A – Print Engine: The Print Engine contains major systems such as the Printhead, and Planarizer. B – Build Chamber: The Build Chamber is the area where the print platform can be found. All print jobs are built on the print platform. For more information see Printing Area. C – User Interface (UI): This is the built-in touchscreen that allows the user to interface with the printer. The touchscreen allows the user to check printing status, material levels, as well as power the printer off. D – Power Cord and Power Switch: The electrical power cord is plugged into the printer here. There is also a Power Switch located next to the power outlet. E – Material Drawer Module (MDM): The MDM drawer is a push/push type mechanism. To open the drawer push in, the drawer should pop open allowing you to pull it open the rest of the way. The MDM contains the part and support materials and the waste bag.

In this case, the idea proposed for other supply chain issues, to use AM for onshoring production, is just not applicable. In the future, it could be feasible to massively 3D print electronics, however, the best technology for electronics 3D printing available today, developed by Nano Dimension, is still far from being mature enough for mass production requirements.

This time the issue is not just at an industrial level. It is a massive global challenge that extends across multiple product categories. Apple postponed the launch of the iPhone 12 and PlayStation 5’s have been impossible to get since they launched in heavily reduced numbers during the past Christmas period. Even the largest personal computer companies are not even coming close to meeting demand.

Now the issue is starting to hit 3D printers, which of course make very intensive use of electronics: in particular for complex technologies such as material jetting. The most evident case to emerge is the global shortage of printheads for 3D Systems MJP 2500 W wax 3D printer, one of the most widely adopted for jewelry casting applications.

From New Zealand to Italy, the printheads are simply out of stock and clients are desperately looking for them. Without the printheads, their digital, local, on-demand production stops. Not exactly the ideal way to present 3D printing as a solution to global pandemic supply chain issues…

3D printing solutions

Ironically, 3D printing and 3D printers could also be a big part of the solution. In a recently published editorial, 3D Systems’ Principal Solutions Leader Scott Green explains how 3D printing can help streamline and optimize electronics manufacturing through improved wafer table thermal management, manifold fluid flow optimization, structural optimization and advanced fixtures.

Better thermal management of wafer tables can simultaneously improve semiconductor equipment accuracy by 1–2 nm, as well as speed and throughput. (Image courtesy of 3D Systems)

For example, better thermal management of critical semiconductor equipment components, such as wafer tables, can improve semiconductor equipment accuracy by 1–2 nm and simultaneously improve speed and throughput. Increased machine speed and uptime leads to more wafers processed and higher overall lifecycle value.

Green explains that “metal AM is a recognized, validated technology in the semiconductor capital equipment industry. The pressures within the market for optimization, the demand for more equipment, and the production barriers are requiring a rapid movement towards additive. Wafer processing equipment is currently in development – and some even shipping – that include additively manufactured parts.”





Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Davide Sher

Since 2002, Davide has built up extensive experience as a technology journalist, market analyst and consultant for the additive manufacturing industry. Born in Milan, Italy, he spent 12 years in the United States, where he completed his studies at SUNY USB. As a journalist covering the tech and videogame industry for over 10 years, he began covering the AM industry in 2013, first as an international journalist and subsequently as a market analyst, focusing on the additive manufacturing industry and relative vertical markets. In 2016 he co-founded London-based VoxelMatters. Today the company publishes the leading news and insights websites VoxelMatters.com and Replicatore.it, as well as VoxelMatters Directory, the largest global directory of companies in the additive manufacturing industry.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.