AM Research

Heriot-Watt University scientists develop new 3D printing technique

Using near-infrared (NIR) light to create complex structures containing multiple materials and colors

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

Scientists at Heriot-Watt University, in Edinburgh, have developed an advanced technique for 3D printing that has the potential to significantly impact the manufacturing industry. The group, led by Dr. Jose Marques-Hueso from the Institute of Sensors, Signals, and Systems, has created a new method of 3D printing that uses near-infrared (NIR) light to create complex structures containing multiple materials and colors.

The scientists achieved this by modifying stereolithography to push the boundaries of multi-material integration. A conventional 3D printer would normally apply a blue, or UV, laser to a liquid resin that is then selectively solidified to build a desired object. However, the limitations of intermixing materials have proven to be a drawback.

Through this project, the scientists use a NIR light source capable of printing at far greater depths into the resin vat – without the need to print in layers. The findings hold tremendous opportunities for industry – particularly those that rely on specialist parts such as in the health and electrical sectors.

“The novelty of our new method, which has never been done before, is to use the NIR invisibility windows of materials to print at a depth of over 5cm, whereas the conventional technology has a depth limit of around 0.1mm. This means that you can print with one material and later add a second material, solidifying it at any position of the 3D space, and not only on top of the outer surfaces,” said Dr. Marques-Hueso. “For example, we can print a hollow cube that is mostly sealed on all sides. We can then come back later and print an object, made from an entirely different material, inside this box, because the NIR laser will penetrate through the previous material as if it were invisible, because, in fact, it is completely transparent at the NIR.”

“Fused Deposition Modelling (FDM) technology was already able to intermix materials, but FDM has a low resolution, where the layers are visible, while light-based technologies, such as stereolithography, can provide smooth samples with resolutions under five micrometers,” said Dr. Adilet Zhakeyev, a Ph.D. researcher at Heriot-Watt University who has worked on the project for nearly three years.

According to Heriot-Watt University, a key component of the project has been the development of engineered resins that contain nanoparticles exhibiting the phenomenon of optical upconversion. These nanoparticles absorb the NIR photons and transform them into blue photons, which solidify the resin. This occurrence is ‘non-linear’ – meaning it can obtain the blue photons mostly at the focus of the laser, and not on the way through it. For this reason, the NIR can penetrate deep into the material as if it were transparent and solidify only the material within.

The new 3D printing method allows multiple materials, with different properties, to be printed in the same sample – for example, flexible elastomers and rigid acrylic, which are useful for many businesses, such as shoe production. The technique opens a myriad of new possibilities, including 3D printing objects inside cavities, restoration of broken objects, and even in-situ bioprinting through skin.

“In the same research project, we had previously developed a resin that can be selectively copper-plated,” said Dr. Marques-Hueso. “Combining both technologies, we can now 3D print with two different resins and selectively cover just one of them in copper by using a simple plating solution bath. This way, we can create integrated circuitry in 3D, which is very useful for the electronics industry.”

Despite this technology offering an exciting glimpse into the future, the costs are surprisingly low. According to Dr. Marques-Hueso, “A clear advantage of this technique is that the full machine can be built for less than £400. Some other advanced technologies that use lasers, such as Two-Photon Polymerisation (2PP), require expensive ultrafast lasers in the order of tens of thousands of pounds, but this is not our case because our specialist materials allow the use of inexpensive lasers… Now that we have results to support our claims, we hope to partner with businesses and develop this technology further.”

The project, titled ‘Multimaterial Stereolithography by Crosslinking through Luminescence Excitation‘, has received £280,000 of funding from the Engineering and Physical Sciences Research Council (EPSRC). Its findings have been published in Applied Materials Today.

Research
Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Edward Wakefield

Edward is a freelance writer and additive manufacturing enthusiast looking to make AM more accessible and understandable.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • PHPSESSID
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Save
Accept all Services

Newsletter

Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.