3D Printed FootwearBostonConsumer ProductsTrends 2024

Five footwear industry leaders using 3D printing for production today

AM is clearly the way to go at adidas, Nike, New Balance, Reebok and Under Armor

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

Footwear 3D printing is set to grow into a multi-billion dollar revenue opportunity over the next 10 years. If this consumer product segment will deliver what many are now quite convinced it will, most of the credit will likely go to five major footwear AM companies that have been making significant investments in developing effective digital footwear manufacturing workflows.

As we will see in the article and chart below, each of these leading footwear AM companies – adidas, Nike, Under Armour, New Balance and Reebok – is targeting different footwear final parts and products, relying on different technologies and materials. However, there are some common trends that are based on the overall macro trend of advanced manufacturing: mass customization and digital mass production. Let’s kick it into gear.

*This article focuses only on direct digital production activities from major footwear manufacturers. By no means does it intend to convey the message that these are the only activities in footwear AM, or the most significant. Highly significant AM adoption in footwear also revolves around 3D printed insoles/sandals, molds and prototyping. These are extensively covered in this website’s dedicated 3D Printed Footwear section.


Application(s): Lattice Mass Produced Midsoles
Technology: DLS (Digital Light Synthesis)
Technology provider: Carbon
Material: Polyurethane
Digital Data: Generative design

Although it was the latest major footwear company to make a public move into 3D printing of final parts, adidas is the brand that has made the most significant steps toward implementing additive manufacturing in footwear mass production. The company has already produced over 100,000 pairs of shoes with plastic midsoles made via a new 3D technology using Carbon’s Digital Light Synthesis technology (a type of layerless photopolymerization). Now the company has confirmed it is ramping up that production to millions of units in the coming years. Adidas already has access to enough printers from Carbon to make one million pairs of 3D printed sneakers. The process uses a special type of durable and flexible liquid resin which is a combination of thermoset polyurethane and a photopolymerization agent.

Footwear AM companies
The adidas Y-3 Runner 4D II

The Futurecraft 4D project, adidas’ first venture into 3D printing, features 3D printed, generatively designed midsoles. The first pairs to be produced cost upwards of $300 (and were quickly sold out). The price has been dropping, not for lack of demand but for scale economics coming into play, lowering the price of materials and hardware accessibility. Since then several new models have arrived on the market including the AlphaEdge and Y-3 Runner, proving that the technology has got legs.


Application(s): Mass customized uppers, custom football cleats
Technology: SDM (Solid Deposit Modeling), SLS
Technology provider: EOS, Prodways for SLS, SDM developed internally
Material: TPU/nylonDigital Data: from biometric data
Digital Data: Biometric data, custom designs

Nike was among the first companies to make intensive use of 3D printing in high-performance product development, using the technology for quick iterations of functional parts. The highest profile projects run by Nike is the Nike Vapor Laser Talon, the first 3D printed football cleat specifically designed to provide optimal traction on football turf and to help athletes maintain their “drive stance” longer. While this project did not make it into full production, it was followed by the Nike Vapor High Agility cleat, developed within the company’s “Shuttle” program. 3D printing allowed to test, iterate and create shapes not possible with traditional manufacturing processes, which helped push the limits of innovation faster. In both cases, a Selective Laser Sintering (SLS) process was used along with a proprietary material selection. Nike has also reportedly been working with Prodways on developing a line of 3D printed midsoles using the company’s SLS technology and TPU materials.

Footwear AM Companies
The solid deposit modeling (SDM) technology for the Nike Flyprint uppers.

The company is now experimenting with final parts production, specifically for the labor-intensive production of uppers. Nike Flyprint is the first 3D printed textile upper in performance footwear. The Nike Flyprint uppers are produced through solid deposit modeling (SDM), a process whereby a TPU filament is unwound from a coil, melted and laid down in layers. One interesting benefit of 3D textiles that emerged over traditional 2D fabrics is the increased dynamism made possible by adding an interconnection beyond a warp and weft.

New Balance

Application(s): Limited edition midsoles, customized spike plates
Technology: SLS, SLA
Technology provider: EOS and 3D Systems for SLS, Formlabs for SLA
Material: Nylon and Duraform TPU for SLS, new durable Formlabs resins in development for SLA
Digital Data: biometric data, generative design

Boston-based New Balance was one of the first companies to experiment with 3D printing for a number of applications. First, it unveiled the Zante Generate shoe with 3D printed midsole in partnership with 3D Systems in 2016. Produced by SLS using the Duraform TPU elastomer material, the Zante Generate was the first 3D printed running sneaker to be made commercially available, however, the forty-four pairs of the Zante Generate were only available at newbalance.com and in Boston’s New Balance Experience Store with a price tag of $400. The recent introduction by New Balance of automated finishing technologies from Russell Finex in its AM lab indicates the company is working toward increased use of 3D printing as a means to automate (and possibly onshore) midsole manufacturing processes.

The New Balance Zante Generate.

In other projects, New Balance also worked with EOS’ SLS technology, to use design-driven manufacturing for 3D printing custom spike plates for their elite athletes. Over the past couple of years, the company has been working on a separate project with Formlabs focusing on mass customization of high-performance footwear via the company’s affordable SLA systems and newly developed materials.

Under Armour

Application(s): Limited edition midsoles
Technology: SLS
Technology provider: EOS
Material: TPU
Digital Data: generative design

Under Armour, a sportswear company that has made innovation a key element of its strategy is also among the first adopters of AM for end-use part production. The company’s UA Architech is a line of shoes that features a 3D printed midsole. The first Architect line product was introduced in 2016, designed with Autodesk software and produced using EOS SLS technology. The second product, the UA Futurist, was introduced in 2017 and features 3D printed midsoles that use a TPU material developed by Lehmann&Voss&Co.

The latest UA Futurist from Under Armour.

Priced at $300, the shoe series is Under Armour’s most expensive to date, but it also represents the company’s largest batch of shoes with 3D printed parts to date. With each shoe series, Under Armour has quadrupled production, starting with 96 pairs for the original Architech, followed by 410 for the next 3D printed shoe series. The company is now manufacturing the Futurist in a batch of a little over 2,000 pairs.


Application(s): Mass produced uppers
Technology: Liquid Drawing (pneumatic material extrusion via robotic arm)
Technology provider: Developed internally
Material: BASF polyurethane
Digital Data: generative design

In 2018 Reebok debuted the Liquid Floatride Run shoe, made using the same technology it introduced in its Liquid Factory. The process is essentially a 3D drawing process. The shoe is designed for distance running, cardio workouts, and comfort. In 2016 Reebok launched its Liquid Factory in Rhode Island which uses robotic arm based pneumatic extrusion process to directly manufacture shoe uppers rather than using molds.

Footwear AM Companies
The Floatride Run from Reebok.

The $180 Floatride Run running shoe mixes the company’s existing Floatride Run sneaker with the Liquid Factory 3D printing technology. It has both liquid elements and “Flexweave” material. The improved shoe is 20% lighter than the original and has a few new features including liquid laces. This means the laces are 3D printed directly onto the shoe upper.

Where to run to?

While these initiatives are undoubtedly fascinating, the numbers they are producing today are tiny if compared to the overall footwear market. When targeting mass production, footwear products clash with enormous scale economy dynamics that can bring the price of an injection molded midsole – even one with a lattice-like geometry – down to about $1. How can direct 3D printing compete with this type of productivity? Will there ever be enough added value in onshoring, automating, customizing and creating more complex and efficient geometries to justify the investments required by implementing a 3D printed production line?

The truth is that there doesn’t necessarily need to be. AM material prices – especially for Carbon DSM technology have been dropping to around $50 per Kg, mainly due to higher throughput capabilities and significant demand from adidas. SLS materials remain very high and have limitations but new planar PBF technologies such as HP’s MJF and voxeljet’s HSS could contribute to increasing power demand and thus reducing material price and cap ex investments.

In the end, direct 3D printing of footwear parts will not replace injection molding anytime soon, if ever. But in a $260 billion, growing global market there is plenty of room for both types of products to run around.

Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Davide Sher

Since 2002, Davide has built up extensive experience as a technology journalist, market analyst and consultant for the additive manufacturing industry. Born in Milan, Italy, he spent 12 years in the United States, where he completed his studies at SUNY USB. As a journalist covering the tech and videogame industry for over 10 years, he began covering the AM industry in 2013, first as an international journalist and subsequently as a market analyst, focusing on the additive manufacturing industry and relative vertical markets. In 2016 he co-founded London-based VoxelMatters. Today the company publishes the leading news and insights websites VoxelMatters.com and Replicatore.it, as well as VoxelMatters Directory, the largest global directory of companies in the additive manufacturing industry.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.