BindersConcreteConstruction 3D PrintingMaterials

D.fab promises 90% cost reduction in concrete 3D printing materials

New solution from COBOD and CEMEX enables rapid development of 3D printable concrete at comparable costs to ordinary concrete

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

Concrete 3D printing of building shells has grown considerably in the last few years, with more and more building shells being 3D printed, even buildings with up to 3 floors and windmill towers. However, the high cost of 3D printing mortars has prevented more widespread and large-scale application on multi-unit projects, including large-scale affordable housing projects. This is about to change as CEMEX, in cooperation 3D construction printer supplier COBOD, developed the new D.fab solution for rapid development of cost-effective concrete 3D printing materials.

The use of 3D printing in construction projects has gained ground on a global scale given that this new construction method has the potential to deliver significant savings due to efficient use of materials and less need for labor combating an increasingly scarce availability of skilled labor as well as offer new advantages in terms of form freedom. However, virtually all projects to date have been printed, not with real concrete, but with 3DCP bagged / ready-to-mix dry mix mortars characterized by a very high cement content.

Various suppliers have emerged on a global scale to assist the adoption of 3D printing by providing convenient ready-to-mix dry mix mortar solutions, that are relatively easy to apply in the various 3D printers and demonstration projects. But the problem has been the price, as dry mix mortars typically are 5-10 times more expensive than ordinary ready-mix concrete. So far, none of the globally leading cement and concrete companies has been able to deliver a solution, which would enable the 3D printing of an ordinary type of concrete and to the same price as ordinary concrete, but now CEMEX in cooperation with globally leading 3D construction printer supplier COBOD has launched such a solution, called D.fab. Henrik Lund-Nielsen, Founder & General Manager of COBOD International explains exactly how it works in the video below.

Davide Zampini, CEMEX Head of Global R&D, explained: “CEMEX has been monitoring the developments in 3D printing for some time, but it was important to intervene with significant innovation and improvement. Although we recognize that it can be convenient to 3D print with dry mix mortar materials, our R&D focus was not to go down that route, because we believe that it is important to make 3D Printing accessible. Together with COBOD we have developed the material and technological solution for 3D printable concrete. CEMEX’s D.fab admixture range enabled the development of an innovative 3D printing approach, yet offer a material comparable to conventional concrete.”

CEMEX and COBOD achieve 90% cost reduction in concrete 3D printing materials with D.fab solution to enable rapid development

“The introduction of this revolutionary 3D printing system is a testament to our customer-centric mindset and relentless focus on continuous innovation and improvement. Working together with COBOD, we have developed an experience for customers that is superior to anything that has been provided in the past,” said Juan Romero, Executive Vice President Sustainability, Commercial, and Operations Development of CEMEX.

The solution from CEMEX and COBOD consists of a system of admixtures, where specific chemicals are introduced at the batching plant and designed to make the concrete fluid and easy to pump. Whereas another admixture, which speeds up curing, is added through the dozing unit at the printhead of COBOD’s printers and makes it possible for the concrete to gain shape instantaneously and buildable. The solution only requires central sourcing of less than 1% of the concrete mix, while more than 99% of the concrete can be based on local available raw materials including the cement, which can come from any cement maker, leading to very significant cost savings compared to 3D printing mortars. The new solution was first proven in a suburb to Luanda, the capital of Angola, where it was used to 3D print Angola’s first 3D printed building, a 53 m2 (570 sf) house.

Ricardo Almeida, CEO of Power2Build, Angola said: “To solve Angola’s and Africa’s affordable housing crisis requires not only a technology, that can build faster and can work with far less skilled labor but also materials that are as cheap as ordinary concrete. For our first building for the walls we used 12 m3 of concrete of 80 Euro/m3, so our total cost for the concrete materials for the 53 m2 house was less than 1.000 Euro. With such low materials prices, the strength and quality of concrete combined with the speed and automation of 3D printing, we can help solve the affordable housing crisis in Angola and elsewhere.”

Commenting on this milestone for the widespread adoption of the 3D construction printing method, Henrik Lund-Nielsen, Founder & General Manager of COBOD International stated: “When we began 3D construction printing back in 2017, where we 3D printed Europe’s first 3D printed building, we made the concrete recipe ourselves. We had to use a lot of cement to get it to work, with the consequence that our recipe was too expensive and not CO2 friendly. While we have been happy to help various cement and concrete manufacturers develop dry mix 3D printable mortars, we have also insisted on that a solution for making real concrete made from local available materials would be needed for mass application of our technology. We are more than pleased that CEMEX took on the challenge, and proud that we in cooperation could develop the new solution. Prices for materials will come down from the typical 700-900 Euro/m3 for3D printable mortars to now 60-90 Euro/m3 depending on geographic location. This is equivalent to a reduction in cost of materials of about 90% and is truly a game changer for our industry and the construction industry globally”.

Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Davide Sher

Since 2002, Davide has built up extensive experience as a technology journalist, market analyst and consultant for the additive manufacturing industry. Born in Milan, Italy, he spent 12 years in the United States, where he completed his studies at SUNY USB. As a journalist covering the tech and videogame industry for over 10 years, he began covering the AM industry in 2013, first as an international journalist and subsequently as a market analyst, focusing on the additive manufacturing industry and relative vertical markets. In 2016 he co-founded London-based VoxelMatters. Today the company publishes the leading news and insights websites and, as well as VoxelMatters Directory, the largest global directory of companies in the additive manufacturing industry.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.