3D Printing ProcessesAdditive Mass Production - AMPMaterialsSustainability

CNEA and INTI Led Project Shows that Post Consumer Recycled Plastics Can Be Used to 3D Print Functional Devices

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.


The Instituto Nacional de Tecnología Industrial in Buenos Aires, Argentina, has partnered with Argentina based 3D printing companies PRINTALOT, ENYE TECH (b-pet) and CHIMAK to carry out a study which set out the demonstrate that post consumer recycled (PCR) plastics can actually be used in 3D printing to produce fully functional, mechanically advanced devices.

The work was presented at the 6th International IUPAC Green Chemistry conference, which took place in Venice, Italy. The team presented a poster, focused on the development of the filaments for 3D printing based on recycled plastics that was 100% developed by INTI. An oral presentation, related to the design and testing of the 3D printed devices for gas phase remediation was also led by the CNEA group, leveraging on extensive expertise in Advanced Oxidation Technologies. The INTI group contributed with its experience in 3D printing technologies and processes.


The materials used were developed by INTI and ENYE TECH, and produced commercially by PRINTALOT. The first prototypes were printed in a CHIMAK LEON 200 3D printer. The production of 3D printed photoreactors is part of the project “From waste to fuel: 3D-printed gas phase reactors for low cost methane photocatalytic synthesis by reduction of emitted CO2 in water treatment” funded by the 2015 Green Chemistry for Life research grants (PhosAgro/UNESCO/IUPAC Partnership in Green Chemistry for Life) and awarded to Dr. Natalia Quici. Dr. Natalia Quici and Dr. Nahuel Montesinos belong to the Chemical Environmental Remediation Division of CNEA, led by Dr. Marta Litter.

The focus of the CNEA-INTI lead study consisted primarily in the development and use of a novel material for thermal extrusion (FFF) 3D printing. This material was engineered using a combination of recycled plastics to display enhanced fluency.  One of the main goals of the study was to increase ease of use while reducing manufacturing times. The results of the study were recently presented at the International IUPAC Conference on Free Chemistry, by Guido Palazzo, of the Centro de Investigación y Desarrollo para la Industria Plástica at INTI.


Enhanced thermal properties were observed in a modified blend of post consumer recycled PET and industrial scrap recovered polypropylene (PCR PET/SR PP). The INTI research team studied the inter-layer adhesion of the materials and concluded that airtight reactors can be fabricated through the use of thermal extrusion 3D printing. A fully 3D printable airtight photocatalytic reactor was designed to be fabricated in less than 4 hours combining PCR PET and PCR PET/SR PP compound filaments.

3d-printed-functional-device-with-recycled-plastics The devices developed as a result of a collaboration between INTI (National Institute of Industrial Technology, Argentina) and CNEA (National Atomic Energy Commission, Argentina) research groups are not yet at a commercial stage,” said Guido Palazzo. “Nevertheless, the low cost of production of the remediation devices and their ease of production in a matter of hours are promising baselines for their commercial insertion after the technology transfer is completed.”

The impregnation of TiO2 nanoparticles in the 3D printed support was successful and the structure was used in an airtight reactor obtaining 55% of NO gas removal efficiency under UV light irradiation. A further in-depth study was displayed at the oral presentation “Recycled 3D Printed Photocatalytic Active Supports for NOx Abatement”.

3D printing with recycled materials proved to be very promising for the optimization of material costs and manufacturing time. “The recycled plastics used for this development are ubiquitous and represent a low-cost raw material,” Palazzo continued. “Filaments for 3D printing are commercially available under the B-PET brand. They print as easy as PLA and are 100% recyclable. The experimental results show an excellent catalyst adhesion to the surface of the printed device and very promising remediation yields.”


While there exists a myth that plastics are easily recyclable, reality tells a very different story: post consumer plastics is very difficult – if not currently impossible – to recycle and use in applications that require high mechanical or aesthetic properties. Nevertheless The use of plastics is increasing exponentially and most of it is not recycled, which means that it often lingers in the environment for centuries and, if burnt, releases toxic fumes and CO2 into the atmosphere.

The promise of 3D printing is that of a more sustainable and distributed manufacturing but this is inextricably linked to enabling the use of post consumer plastics as consumable materials, particularly in thermal extrusion based systems. The continued development of functional methods for recycling post consumer plastics – and implementing them for creating PCR filament – is key to the sustainable growth of the manufacturing industry as a whole.

About INTI
The National Institute of Industrial Technology (Castilian: Instituto Nacional de Tecnología Industrial), commonly known as INTI, is an Argentine federal agency in charge of the development of Industrial technology. It is a technical reference of the Argentine State in implementing regulations and identity of product quality in industry and commerce, is also responsible for public technology for the integration of the entire community into the production system, promoting partnership and local development and fostering the creation companies and micro enterprises. Website: www.inti.gov.ar

About CNEA
The National Atomic Energy Commission (Spanish: Comisión Nacional de Energía Atómica, CNEA) is the Argentine government agency in charge of nuclear energy research and development. The agency was created to develop and control nuclear energy for peaceful purposes in the country. CNEA’s facilities include the Bariloche Atomic Centre (in San Carlos de Bariloche), Constituyentes Atomic Centre (in Buenos Aires), and Ezeiza Atomic Centre (in Ezeiza, Buenos Aires Province). CNEA operates research reactors at each of these sites. Website: www.cnea.gov.ar

About Printalot
PrintaLot was born from the need for quality filament at a competitive price, locally produced in Argentina We understand that we are facing a paradigm shift in the production of objects and we strive to be part of it. We believe that the relationship with our customers is fundamental. We are flexible and know how to listen to our customers’ specific requirements and and offer them the product they need. We believe it is important to grow together. Website: www.printalot.com.ar

 About EnyeTech
EnyeTech is a digital agency formed by developers, engineers, designers and IT specialists who work together through agile and lean principles. The company’s primary focus is building products based on people’s needs, as a starting point to create technology. Website: www.enyetech.com; www.bpetfilament.com

About Chimak
Chimak is dedicated to marketing, design and technology development for 3D printers. The comapny focuses on manufacturing system based on fused deposition modelling or ‘FDM’, technology in which the model or part is produced by extruding small flattened strings of molten material to form layers as the material hardens immediately after extrusion. Website: www.chimak3d.com

Consumer Products AM 2024

This new market study from VoxelMatters provides an in-depth analysis and forecast of polymer and metal AM in the consumer products industry across the three core segments of the additive manufactu...

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.