AM IndustryLegislation

CECIMO: EU resolution could stifle innovation in 3D printing

Industry association urges European Parliament to differentiate between B2B and B2C

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

On one hand, the acknowledgment by the EU Parliament of the growing impact that 3D printing is having on just about every segment of manufacturing can be welcomed as a positive evolution. On the other hand CECIMO – the European Machine Tool Industry Association – is warning against the risk that EU 3D printing regulations may hold if not properly thought out.

For those who are not yet up to date, the European Parliament released a non-binding resolution about 3D printing on July 3rd, questioning the suitability of current EU regulations. CECIMO believes that Europe needs a more measured approach to avoid premature regulation that could negatively impact innovation in the EU. At the recent AMEC 2018 conference, CECIMO and other AM industry representative had already expressed concern over the risk for over-regulation and the need to increase AM adoption to preserve Europe’s current leadership in this field.

The Parliament adopted its resolution, “Three-dimensional printing: intellectual property rights and civil liability”, with 631 votes in favour, 27 against and 19 abstentions. It underlines the advantages of 3D printing for the economy and society, the production status achieved by 3D printing in various sectors and the need for new rules supporting faster certification for parts in the manufacturing process.

EU 3D printing regulations
Mady Delvaux-Stehres, MEP (left); Philippe Vannson, Head of Unit Photonics Unit at DG CONNECT of the European Commission (centre); Florian Feucht, Head of Additive Manufacturing Application and Sales at DMG MORI/Realizer (right), at the recent CECIMO conference on AM.

IP rights and business applications

Nevertheless, the resolution also calls for the European Commission to consider a potential revision of the Liability and Intellectual Property Rights (IPR) regulatory framework for 3D printing in the EU, and turns its attention to the feasibility of national copyright levy systems for 3D printing. In doing so, it disregards the negative impact of these measures on innovation, as well as significant economic inefficiencies – including the administrative burden that copyright levy systems impose on the development of 3D printing in Europe.

There is no evidence today of 3D printing being used as an easier or favored production method for counterfeit goods.Filip Geerts, CECIMO Director General

“There has been a rapid increase in industry-driven solutions to ensure data protection in the 3D printing process,” CECIMO Director General, Filip Geerts exclusively told us, adding to that, “there is no evidence today of 3D printing being used as an easier or favored production method for counterfeit goods. Increasing regulatory intensity at this stage would only be detrimental for the European manufacturing sector.”

In its statement, CECIMO approves that the European Parliament recognizes the added value of 3D printing and its technological, economic and environmental benefits for Europe. The association also urges the European Institutions, however, to firmly differentiate between business-to-business (B2B) and business-to-consumer (B2C) uses of the technology, when approaching 3D printing from a regulatory perspective. 3D printing production methods are already subject to a high level of requirements in the sectors where this production method is applied.

Incrementing leadership

The need for shade regulation in any new industry segment is clear as it is clear that any new beneficial technology could be limited in its growth by shortsighted regulatory approaches. This is a comment trend for any new technology and could be particularly challenging in AM, especially with other geographical areas – such as Asia and the US – rapidly accelerating their use and adoption of additive manufacturing, often facilitated by lean and precise regulatory approaches.

Today Europe has a key position in several segments of the 3D printing market world-wide, leading the word in metal AM technologies and overall AM adoption for advanced applications. For the full adoption of the technology to take place across the continent, it is of the utmost significance to avoid new regulatory actions on liability and IPR, which would stifle innovation and slow down the uptake of 3D printing in EU countries.

The adoption of this Resolution requires a mandatory response within three months from the European Commission, which has been requested to outline its views and intentions on this topic. CECIMO will continue to engage closely with European Commission officials to raise the message that the current patchwork of liability and IPR rules is already fit for purpose in the European 3D printing landscape.

Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Davide Sher

Since 2002, Davide has built up extensive experience as a technology journalist, market analyst and consultant for the additive manufacturing industry. Born in Milan, Italy, he spent 12 years in the United States, where he completed his studies at SUNY USB. As a journalist covering the tech and videogame industry for over 10 years, he began covering the AM industry in 2013, first as an international journalist and subsequently as a market analyst, focusing on the additive manufacturing industry and relative vertical markets. In 2016 he co-founded London-based VoxelMatters. Today the company publishes the leading news and insights websites and, as well as VoxelMatters Directory, the largest global directory of companies in the additive manufacturing industry.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.