Consumer Products
As high-throughput and production-ready technologies for both polymer and metals become more established, 3D printed consumer products are becoming an increasingly relevant additive manufacturing segment. Millions of consumer products have begun integrating mass-produced—and in some cases mass-customized—3D printed elements.
Nearly 37 million consumer product parts were 3D printed in 2023 alone, growing by 7 million (+23%) compared to 2022, according to the latest Consumer Products AM market report published by VoxelMatters, which goes into great deal for each of the mains consumer products segments that implement 3D printing (footwear, eyewear, sporting goods, consumer electronics, fashion, designer products and furniture).
When we talk about additive manufacturing for consumer products, we refer primarily to industrially 3D printed products rather than products made using low-cost consumer 3D printers. Consumers of industrially 3D printed products are concerned with the products themselves and only very marginally with the processes used for making them. They are users of 3D printed products because they are better, more efficient, and more customized, not because they are 3D printed. For this reason, additive manufacturing used in the consumer products sector must be able to offer a product that is equal or superior to conventionally manufactured ones at a comparable cost.
Today’s most common commercially available 3D printed consumer products include eyewear frames, footwear products (insoles, midsoles, sandals), and sporting equipment and gear. These product categories all leverage 3D printing to offer improved customization and better performances through more efficient product geometries that ensure lightweight and ergonomic properties. Within this segment, areas such as 3D printed footwear, 3D printed eyewear and 3D printed sportswear are embracing AM technologies at a very rapid pace, driven by higher productivity polymer AM systems.
Eyewear
While a key consumer AM application, 3D printing in the eyewear market is still relatively niche, and the trend for mass customization largely drives its growth. The lower costs of accessibility to AM technologies and materials, coupled with much wider availability of 3D capturing and 3D scanning devices and software all contribute to making custom 3D printed eyewear into what could be the first truly mass customized product. At MIDO 2024, for instance, Materialse demonstrated its Eyewear Fitting Suite, which generates customized 3D printed frames for customers, which can then be 3D printed on demand.
Design freedom and production agility are also key in this subsegment, as smaller eyewear brands leverage AM to create innovative frame designs on demand or in small batch quantities. Laser powder bed fusion technologies such as SLS are the dominant production method in the 3D printed eyewear subsegment, however MultiJet Fusion, resin-based technologies like DLP and metal 3D printing (for example, Hoet) are also used.
Footwear
The first footwear products to be 3D printed were orthopedic insoles. These customized products ensure increased comfort by perfectly adapting to the foot’s geometry and the user’s gait. Evolution of basic insole products led several companies to introduce 3D printed orthotics, ensuring even more accurate and effective support, or 3D printed custom sandals. Midsoles then became one of the most significant cases of mass production via additive manufacturing, with adidas and Carbon developing a workflow for serially 3D printing midsoles. Other footwear brands have also turned to 3D printing, including Brooks, ASICS, Puma, Reebok and more, in producing experimental and commercially available footwear.
Today, AM has many different uses in footwear design and manufacturing. As we saw, insoles and midsoles are a big opportunity, but uppers (the production of which are very labor intensive) are also in some cases being 3D printed to increase production automation. Luxury shoes and limited edition designs are also an interesting area for AM footwear applications.
Sporting goods
In the sporting goods segment, 3D printing has been used to both develop and make entire products and parts, including snowboarding bindings, goggles, ski boots, golf clubs, backpacks, professional football helmets, bobsled components, entire bicycles and bicycle parts and even an airless basketball. The primary aim of using AM for these applications is to enhance performance and ergonomics through design optimization, sometimes customization. In virtually all cases, these printed products do not replace their conventionally manufactured counterparts; they are intended for professional or high-level users.
Many AM technologies are used in this particular subsegment. For instance, laser powder bed fusion has produced snowboard bindings and a lattice structure for ski goggles. At the same time, other lattice-based products, like bicycle seats, have been made using Carbon’s DLS technology. Metal AM has also played a part in the production of cutting-edge bicycle parts, including titanium brake levers, frames and more.
Other consumer AM applications
Another typical consumer product segment using 3D printing at various levels is jewelry. In this case, 3D printing is primarily used for indirect production via lost wax casting, enabling more advanced geometries with traditional materials. The next generation of jewelry products uses additive manufacturing as a direct manufacturing tool for technical ceramics and direct precious metal additive manufacturing. There are also examples of direct 3D printing of jewelry and watches. For instance, 3D printed metal chassis for high-performance or luxury watches, and the direct printing of precious metals for statement jewelry pieces. Other consumer AM applications include homeware and interior design elements, such as 3D printed sinks, cutting-edge furniture and lighting elements.
-

3DXTECH donates 185 kg of filament to MakeGood for custom assistive devices
3DXTECH has donated 185 kilograms of 3D printing filament to MakeGood Inc., an organization that uses 3D printing to design and produce free, custom assistive devices for people with disabilities…
-
Creality’s new mBox is an AI-enabled 3D printer for kids
Desktop 3D printer manufacturer Creality continues to expand its product portfolio and its customer base with newest system, the mBox 3D printer. Designed for children, the mBox 3D printer is…
-
For bike saddle pioneer Selle Italia, Carbon 3D printing is the future
Located in Veneto, Italy, Selle Italia has been making bicycle saddles since 1897. In its early days, the company specialized in making saddles from iron and leather—the cutting edge at…
-
Arkema and Carbon deepen longstanding materials partnership
For over 13 years, 3D printing company Carbon and specialty materials leader Arkema have collaborated on developing high-quality materials for Carbon’s Digital Light Synthesis (DLS) technology. These materials, along with…
-
Tarek Atoui installation at Tate Modern features massive 3D printed forms
Until April 11, 2027 visitors of the Tate Modern in London will have the opportunity to experience sound artist Tarek Atoui’s latest installation. The large-scale piece, created in partnership with…
-

Alexander Skarsgård dons 3D printed prosthetics in ‘Wicker’
While the big film release of the season, You Can See Everything, continues to dominate in entertainment media and social conversations, another new picture is starting to gain some buzz. Starring…
-

Maker Faire Rome 2026: a visit to Europe’s fair of ideas
On October 23 we walked into Maker Faire Rome through the press entrance at the Gazometro Ostiense just as the One Love Machine Band was running its soundcheck on the…
-
LAIKA 3D printed over 142,000 full-color faces for ‘Wildwood’
Wildwood, the latest animated epic from LAIKA, has only been out in theaters for a few days and it has already grossed nearly $15 million and garnered overwhelmingly positive reviews.…
