Additive Mass Production - AMPAutomotive AMCareers in AMIndustrial Additive Manufacturing

Automotive Firm Techniplas Establishes 3D Printing BU Headed by Former 3D Systems CEO

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

Automotive injection molder Techniplas is establishing an additive manufacturing center to speed up product development as it digitizes its operations across the board. “It’s coming to life as we speak,” said Avi Reichental, CEO of the new Techniplas Digital business unit.

“It’s the future of short-run manufacturing,” he predicted. Manufacturing in the future will be a hybrid of traditional and new methods, said CEO Avi Reichental.

Techniplas has already installed a dozen 3D printers at its Ventura, Calif., operation, Reichental said. Initial emphasis will be on direct metal printing for rapid tooling development. Using 3D-printed metal inserts in standard mold bases will accelerate toolmaking.

In parallel, the firm will develop component production from continuous, high-speed, UV-cured polymers. 3D printing will support the drive to vehicle lightweighting and improved plastics performance. With 3D printing, complexity is “free,” the company claims.

Techniplas Digital is charged with accelerating the migration of smart technologies from the edge of development to the company’s core operations, including custom injection molding for auto and other industries. Reichental said Techniplas has a long history of design and manufacturing that it can leverage for a rapid transition to digital-based manufacturing.

“We will take what we have done extremely well over many decades and apply it.”

The Nashotah, Wis., company claims it is among the first to combine traditional and additive manufacturing with embedded computing. “Through deep learning capabilities and generative design, the company has the capacity to make new products and services that are reshaping mobility,” the firm said in a news release.

Techniplas will apply digitization to its ongoing work in smart, or cognitive connected systems for auto applications. These end uses include air and water management systems that control auto cabin air quality, active grille shutters that improve a car’s aerodynamics and fuel efficiency, and cognitive lighting systems that allow communication between the driver, car and pedestrian as well as distinctive auto styling and branding.

“We see plastics as the surfaces and in the interface, for example encapsulating sensors.” Reichental said, adding that plastics will be part of new cognitive systems.

Such technology is already appearing in fascia, cladding and lighting. The aim is to combine sensors and computers for intelligent, adaptive lighting as well as customized styling of a vehicle.

Avi Reichental (PRNewsfoto/Techniplas)

Techniplas will develop its new technologies both in the United States and Europe, where Reichental said the firm has strong research and development centers in Switzerland and Germany.

The company plans a large, data-centric management system throughout its facilities around the world. Heading that program is recently appointed Chief Transformation Officer Frederic Desmarchelier. He will work with John Chenoweth, recently named as vice president of information technology. Chenoweth was formerly product manager for General Electric Healthcare and IT manager for Lockheed Martin.

Reichental said Techniplas is partnering with external sources in its digitization drive. It has experience in factory data acquisition but it also will hook up with startup companies that can help it accelerate its programs. Partners include Stanford University, ParaMatters, Rinspeed, Nexa3D and XponentialWorks, a company founded by Reichental. Reichental was president and CEO of additive printing major 3D Systems Inc. for 12 years.

Techniplas does custom injection molding around the world. Its subsidiaries include Dickten Masch Plastics LLC of Nashotah, with locations in Ankeny, Iowa, and Monterrey, Mexico; Nyloncraft Inc. of Mishawaka, Ind., with another location in Jonesville, Mich.; and Weidplas GmbH of Rapperswil, Switzerland, with locations in Rüti, Switzerland; Piracicaba, Brazil; Treuen, Germany, and Auburn, Ala.

Techniplas is a privately held, 2,000-employee company that had consolidated sales of more than $500 million in 2016. In 2016, its injection molding units posted sales of $267 million, placing it at No. 35 in Plastics News’ ranking of North American injection molders.

Consumer Products AM 2024

1,346 polymer and metal AM companies and 143 end-users. Consumer products AM generated $2.6 billion in 2023. Segment expected to grow to $28 billion by 2033 at 26.8% CAGR. This new market study fro...

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.