3D Printing ProcessesCeramic Additive ManufacturingCeramicsMaterials

AM of electrically conductive ceramics shown for heating elements

As part of an R&D Project by PolyMerge, TIWARI Scientific Instruments and Fraunhofer IKTS

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

As part of an R&D Project, PolyMerge GmbH, TIWARI Scientific Instruments GmbH and Fraunhofer IKTS (the Fraunhofer Institute for Ceramic Technologies and Systems Dresden) have developed a process for additive manufacturing (AM) of multimaterial ceramic components – which can be heated up to 1400°C – for the contactless welding of plastic components through infrared heating. The AM process using electrically conductive ceramics was shown for complex heating elements.

AM of electrically conductive ceramics shown for heating elements by Tiwari, Polymerge and Fraunhofer IKTS

In contrast to the state-of-the-art technologies, utilizing quartz glass or metal foil emitters, this new technology offers a much greater geometrical freedom and manufacturing flexibility thanks to 3D-Printing fabrication. The development goal of PolyMerge GmbH, Germany, a manufacturer of machines for plastic welding, was to develop complex emitters for contactless heating and joining of plastic components in short cycle times. A team from Fraunhofer IKTS, Germany, supported the development with its process and material know-how together with the 3D-Printing expertise of TIWARI Scientific Instruments GmbH

In the project, fused filament fabrication for ceramics (CerAM FFF) was used to produce customized emitters. The 3D printing of the various structures was carried out at a moderate temperature of 160°C, at a speed of 25 mm/s, and with a layer height of 150 μm. TIWARI Scientific Instruments GmbH, an ESA-supported startup in Germany, used a commercial 3D printer with a modified print head to additively manufacture the parts. Precise extrusion of the filament and very good adhesion with the print bed allowed the parts to be produced with high detail and no distortion. The applied manufacturing process allows a multi-component design. In this way, a combination of electrically conductive and electrically insulating ceramic material was used to produce the sophisticated heater structure.

AM of electrically conductive ceramics shown for heating elements by Tiwari, Polymerge and Fraunhofer IKTS The base material used for the AM of electrically conductive ceramics to produce the heating elements was silicon nitride (Si3N4), which was blended with electrically conductive molybdenum disilicide (MoSi2). This electrically conducting ceramic composite material has excellent high-temperature strength and withstands high structural loads even during heating. The second material of similar composition, but with a lower MoSi2 content, was developed to provide electrical insulation or to stiffen filigree structures of the conductive component. The electrically conductive and the electrically insulating material were combined into a two-component part by means of multi-material manufacturing. The challenge here was to ensure approximately equal thermal expansion and shrinkage of the two materials during the mandatory heat treatment up to 1800°C (debinding and sintering)

Another advantage of the selected ceramic composite and the fabricated multimaterial part is corrosion resistance. The electrically insulating material can also be used to protect the conductive component against corrosion, preventing oxidation and increasing cycle stability.

Besides applications related to contactless welding at PolyMerge, the technology and process shall also enable the manufacturing of components for aerospace applications, such as lightweight autoignition injectors and other similar applications in Propulsion subsystems.

 

Research
Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Davide Sher

Since 2002, Davide has built up extensive experience as a technology journalist, market analyst and consultant for the additive manufacturing industry. Born in Milan, Italy, he spent 12 years in the United States, where he completed his studies at SUNY USB. As a journalist covering the tech and videogame industry for over 10 years, he began covering the AM industry in 2013, first as an international journalist and subsequently as a market analyst, focusing on the additive manufacturing industry and relative vertical markets. In 2016 he co-founded London-based VoxelMatters. Today the company publishes the leading news and insights websites VoxelMatters.com and Replicatore.it, as well as VoxelMatters Directory, the largest global directory of companies in the additive manufacturing industry.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • PHPSESSID
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Save
Accept all Services

Newsletter

Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.