Automotive AM

Alfa Romeo Sauber F1 Team adds five 3D Systems ProX 800 SLA 3D printers

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

As Formula One becomes more open about the use of AM in its development and production processes, Alfa Romeo Sauber F1 Team has revealed that five new large-format ProX 800 SLA 3D printers from 3D Systems have joined its extensive arsenal of 3D Systems SLS and SLA solutions. In addition, the company is leveraging its experience and capabilities to provide additive manufacturing services and expertise to 3rd parties

Sauber Motorsport AG, the company operating the Alfa Romeo Sauber F1 Team, is not the only company now shedding light on the integration of AM capabilities. McLaren signed a long-term partnership with Stratasys last year, while Sauber has been sponsored Additive Industries. Now the team has added the five new ProX 800 SLA 3D Printers to its headquarters and engineering facilities in Hinwil, Switzerland, within the scope of a new partnership agreement between 3D Systems and the Alfa Romeo Sauber F1 Team.

Sauber Motorsport AG first started using 3D Systems’ solutions more than ten years ago when it built its Additive Manufacturing department. The new SLA (stereolithography) systems join existing 3D Systems products used by the F1 team, including six SLS 3D printers as Sauber is now more open about the key benefits that AM technologies can provide.

“When we decided to upgrade our SLA production capability, we felt it was time to take our cooperation with 3D Systems to a deeper level. We also needed to expand our capacity so replacing some of the older 3D Systems SLA’s with the higherthroughput ProX 800 was a natural choice,” says Christoph Hansen, head of additive manufacturing, at Sauber. “We are using 3D Systems’ SLA solutions predominantly and extensively for wind tunnel testing, but also for tooling for carbon laminating as well as vacuum casting for silicon parts.”

A Must-Have for Wind Tunnel Testing

Wind tunnel testing is essential for the aerodynamic development of a Formula 1 race car. A 60 percent scale model of the car is produced for testing in Sauber’s own state of the art wind tunnel located at its headquarters in Hinwil. This model is produced mostly with additive manufacturing – 3D Systems’ SLS and SLA 3D printers are used for everything from front wings, brake ducts and suspension covers to engine covers, internal ducts and hand deflectors.

“We can’t really compare this process to conventional manufacturing because it would be impossible to do it any other way than 3D printing; we require many parts with superior surface quality in a very short time,” says Reto Trachsel, head of aero design, at Sauber. “There have been times when the wind tunnel, which is also used by our third-party customers, has been running 24/7 and we have been leveraging our 3D Systems’ solutions to produce 200 to 300 plastic parts per workday.”

Racing to the Finish with 3D Printed Tooling

Once the development is approved, the final parts are produced, often in carbon fiber using both conventionally manufactured and 3D printed molding.

“The Alfa Romeo Sauber F1 Team draws on a variety of 3D Systems’ SLA materials to produce tools for different applications. For example, we laminate carbon parts using tools produced in Bluestone material and we use the Xtreme material for vacuum casting tools to produce the sealings,” says Hansen. “Why do we 3D print the tools instead of using conventional tooling techniques? The answer is easy – we get the design complexity for free! This is absolutely essential for parts like complex duct systems.”

“It takes a winning team to succeed in Formula One and the 3D Systems partnership with the Alfa Romeo Sauber F1 Team matches the world’s most advanced additive manufacturing solutions with cutting-edge automotive engineering. By increasing production throughput with the addition of the 3D Systems’ ProX 800 SLA systems, Sauber can test more design revisions and push the limits of race car innovation,” says Phil Schultz, senior vice president, general manager, on-demand solutions and plastics, 3D Systems. “Formula One is the ultimate proving ground for 3D printing and the expertise we continue to acquire can be applied to mainstream passenger vehicles as well as aerospace and other industries.”

Powering Engineering Services for 3rd Party Customers

In addition to using 3D Systems’ Additive Manufacturing for its own prototyping and production requirements, Sauber also leverages the 3D printers for its Engineering services. This enables companies all over Europe to benefit from Sauber’s expertise, 3D printed precision mock-ups, jigs and fixtures, tooling and serial production.

“Sauber Engineering is bringing racetrack performance to all kinds of companies, large and small. Whether we’re optimizing the performance of our own F1 cars or helping our 3rd party customers re-imagine opportunities from prototyping to serial production, we’re relying on our expanding arsenal of 3D Systems’ additive manufacturing solutions to give us a competitive edge,” concludes Hansen.”

Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Davide Sher

Since 2002, Davide has built up extensive experience as a technology journalist, market analyst and consultant for the additive manufacturing industry. Born in Milan, Italy, he spent 12 years in the United States, where he completed his studies at SUNY USB. As a journalist covering the tech and videogame industry for over 10 years, he began covering the AM industry in 2013, first as an international journalist and subsequently as a market analyst, focusing on the additive manufacturing industry and relative vertical markets. In 2016 he co-founded London-based VoxelMatters. Today the company publishes the leading news and insights websites and, as well as VoxelMatters Directory, the largest global directory of companies in the additive manufacturing industry.

Related Articles

One Comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.