3D Printing ProcessesMedical AMMicro 3D printing

In-Vision co-develops 3D printed microneedles for diabetes monitoring

With the Austrian Institute of Technology and DirectSens

Stay up to date with everything that is happening in the wonderful world of AM via our LinkedIn community.

For many of the 422 million people around the world living with diabetes, glucose monitoring is a necessary, and uncomfortable, daily chore requiring a painful pinprick to test the blood. Newer technologies, like the FreeStyle Libre, offer continuous monitoring, but the system still requires that a 5mm rigid metallic needle be driven into the skin. While not as bothersome as the fingertip lance, it’s still uncomfortable for the patient.

Aiming to develop a solution that’s more comfortable for the user, the AIT – Austrian Institute of Technology – partnered with DirectSens and In-Vision to launch the NUMBAT research project. NUMBAT aims at leveraging high-resolution DLP 3D printing to create an array of polymeric microneedles for minimally invasive—and less painful—continuous glucose monitoring (CGM).

The success of the NUMBAT proof-of-concept opens the door for the development of personalized microneedle arrays and even shows promise for other applications, including intradermal drug delivery.

A more comfortable approach to continuous glucose monitoring

Based on previous research literature, the AIT team understood that the microneedle solution they envisioned would require three components: the microneedles themselves, metallization to enable the definition of the electrodes for the electrochemical measurements, and a biofunctionalization layer—a surface modification enabling the glucose detection with direct electron transfer to the electrode.
All of this would be placed on a flexible foil that, when applied to the skin like a patch, would monitor glucose level in real-time in the dermal interstitial fluid, just below the skin surface without reaching nerves or blood vessels.

AIT quickly determined that a conventional metallization process would suffice, but the biofunctionalization and microneedles would require a novel approach. Traditional finger-prick glucometers use glucose oxidase, which enables the generation of a signal in the presence of glucose in the blood sample. However, in order to transport the electronic signal to the electrode, the glucometers also require partially toxic mediators, which are a limiting factor for minimally invasive applications.

The 3rd generation DET enzyme biosensor provided by DirectSens compared to previous generations

To solve that problem, AIT partnered with DirectSens, a pioneer in third-generation biosensors. The DirectSens technology provided the safe, direct electron transfer enzyme biofunctionalization required for the novel surface modification and microneedles AIT envisioned. This allowed the team to lower the voltage required to operate the NUMBAT biosensors, therefore reducing interferences and enabling longer-life performance.

The microneedles challenge

With the biofunctionalization problem solved, next, it was on to the microneedles. Because the team was aiming for extremely small needles— just 500 microns or 0.5 mm high with a 2-micron wide tip — they knew producing such fine projectiles would be challenging with conventional technology.

View of the NUMBAT 3D printer showing the UV DLP projector above the print area.

Traditional micro-injection molding, for example, would not be flexible in terms of customizing the microneedle layout and would stymie experimentation. While this might work in a production environment, during trials, each attempt would require the creation of a new high-precision mold, which would add time, costs, and complexity to the research process. Meanwhile, AIT knew that TPP 3D printing technologies would be too slow and much more expensive.

Speed, flexibility & precision

AIT settled on DLP-based micro-stereolithography printing as the best solution to deliver the flexibility required—both in the substrate material and in experimentation. To create the micro-stereolithography 3D printer, AIT partnered with In-Vision, which provided its Firebird UV DLP Projector equipped with a custom lens design. With a 2-micron pixel-pitch and a 2560×1600 native resolution, the Firebird projector provided the precision and customization to achieve NUMBAT’s specifications.

“The high resolution of the light engine was the critical factor”, said Giorgio Mutinati, senior research engineer, molecular diagnostics, in the Center for Health and Bioresources at AIT. “With its 2-micron pixel resolution and optical design, the projector was beyond the state of the art that we needed to enable and further the development process”.

Drawing of the micro-stereolithography setup built for the NUMBAT project.

In-Vision also collaborated with the AIT team to build the printer and provide and help program the software required. “In addition to the projector, the In-Vision LabView-based software was a core part of the project,” Giorgio said. “In-Vision worked with us to build up the system within our specifications and continue to support us in this project”.

New potential in microneedles

With NUMBAT having reached Technology Readiness Level 4, the team is ready to demonstrate the feasibility of the technologies at the biosensor level but is also formulating new project plans to further explore the printing technology they’ve developed. Prospects include developing a microneedle patch for other biomarkers such as lactate, incorporating biofunctionalized sensors for multiple biomarkers in the same patch, or even including hollow needles for drug delivery to create a closed-loop solution.

“The high-resolution capabilities of this printer give us so many options, and we’re looking for partners to further exploit this technology through additional research on needles and various needle geometries”, Giorgio said. “The competitive speed and flexibility of the technology open the door to many new and novel applications”.



Composites AM 2024

746 composites AM companies individually surveyed and studied. Core composites AM market generated over $785 million in 2023. Market expected to grow to $7.8 billion by 2033 at 25.8% CAGR. This new...

Andrea Gambini

Andrea has always loved reading and writing. He started working in an editorial office as a sports journalist in 2008, then the passion for journalism and for the world of communication in general, allowed him to greatly expand his interests, leading to several years of collaborations with several popular online newspapers. Andrea then approached 3D printing, impressed by the great potential of this new technology, which day after the day pushed him to learn more and more about what he considers a real revolution that will soon be felt in many fields of our daily life.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Close Popup
Privacy Settings saved!
Privacy Settings

When you visit any web site, it may store or retrieve information on your browser, mostly in the form of cookies. Control your personal Cookie Services here.

These cookies are necessary for the website to function and cannot be switched off in our systems.

Technical Cookies
In order to use this website we use the following technically required cookies
  • wordpress_test_cookie
  • wordpress_logged_in_
  • wordpress_sec

Decline all Services
Accept all Services


Join our 12,000+ Professional community and get weekly AM industry insights straight to your inbox. Our editor-curated newsletter equips executives, engineers, and end-users with crucial updates, helping you stay ahead.